Sunton esp32 2.2" c (#151)

* Update readme

* Update README.md

* driver definition? for a vertical 2.2" with touch

* Update platformio.ini

* Update esp32-2432S022C-vertical.json

* Update esp32-2432S022C-vertical.json

---------

Co-authored-by: Sims <38142618+suchmememanyskill@users.noreply.github.com>

CYD-Klipper/boards/esp32-2432S022C-vertical.json

@@ -0,0 +1,127 @@
+{
+    "build": {
+      "arduino": {
+        "ldscript": "esp32_out.ld"
+      },
+      "core": "esp32",
+      "extra_flags": [
+        "'-D ARDUINO_ESP32_DEV'",
+        "'-D ESP32_2432S022C'",
+        "'-D LCD_WIDTH=240'",
+        "'-D LCD_HEIGHT=320'",
+        "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/8)'",
+        "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
+        "'-D GPIO_BCKL=0'",
+        "'-D LCD_ST7789_I80'",
+        "'-D ST7789_I80_BUS_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
+        "'-D ST7789_I80_BUS_CONFIG_DC=16'",
+        "'-D ST7789_I80_BUS_CONFIG_WR=4'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D8=15'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D9=13'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D10=12'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D11=14'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D12=27'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D13=25'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D14=33'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D15=32'",
+        "'-D ST7789_I80_BUS_CONFIG_BUS_WIDTH=8'",
+        "'-D ST7789_I80_BUS_CONFIG_MAX_TRANSFER_BYTES=(LVGL_BUFFER_PIXELS * sizeof(lv_color_t))'",
+        "'-D ST7789_I80_BUS_CONFIG_PSRAM_TRANS_ALIGN=64'",
+        "'-D ST7789_I80_BUS_CONFIG_SRAM_TRANS_ALIGN=4'",
+        "'-D ST7789_IO_I80_CONFIG_CS_GPIO_NUM=17'",
+        "'-D ST7789_IO_I80_CONFIG_PCLK_HZ=12000000'",
+        "'-D ST7789_IO_I80_CONFIG_TRANS_QUEUE_DEPTH=10'",
+        "'-D ST7789_IO_I80_CONFIG_LCD_CMD_BITS=8'",
+        "'-D ST7789_IO_I80_CONFIG_LCD_PARAM_BITS=8'",
+        "'-D ST7789_IO_I80_CONFIG_DC_LEVELS_DC_IDLE_LEVEL=0'",
+        "'-D ST7789_IO_I80_CONFIG_DC_LEVELS_DC_CMD_LEVEL=0'",
+        "'-D ST7789_IO_I80_CONFIG_DC_LEVELS_DC_DUMMY_LEVEL=0'",
+        "'-D ST7789_IO_I80_CONFIG_DC_LEVELS_DC_DATA_LEVEL=1'",
+        "'-D ST7789_IO_I80_CONFIG_FLAGS_CS_ACTIVE_HIGH=0'",
+        "'-D ST7789_IO_I80_CONFIG_FLAGS_REVERSE_COLOR_BITS=0'",
+        "'-D ST7789_IO_I80_CONFIG_FLAGS_SWAP_COLOR_BYTES=0'",
+        "'-D ST7789_IO_I80_CONFIG_FLAGS_PCLK_ACTIVE_NEG=0'",
+        "'-D ST7789_IO_I80_CONFIG_FLAGS_PCLK_IDLE_LOW=0'",
+        "'-D ST7789_DEV_CONFIG_RESET_GPIO_NUM=GPIO_NUM_NC'",
+        "'-D ST7789_DEV_CONFIG_COLOR_SPACE=ESP_LCD_COLOR_SPACE_RGB'",
+        "'-D ST7789_DEV_CONFIG_BITS_PER_PIXEL=16'",
+        "'-D ST7789_DEV_CONFIG_FLAGS_RESET_ACTIVE_HIGH=false'",
+        "'-D ST7789_DEV_CONFIG_VENDOR_CONFIG=NULL'",
+        "'-D ST7789_RD_GPIO=2'",
+        "'-D LCD_SWAP_XY=false'",
+        "'-D LCD_MIRROR_X=false'",
+        "'-D LCD_MIRROR_Y=false'",
+        "'-D BOARD_HAS_TOUCH'",
+        "'-D TOUCH_CST816S_I2C'",
+        "'-D CST816S_I2C_HOST=I2C_NUM_0'",
+        "'-D CST816S_I2C_CONFIG_SDA_IO_NUM=21'",
+        "'-D CST816S_I2C_CONFIG_SCL_IO_NUM=22'",
+        "'-D CST816S_I2C_CONFIG_SDA_PULLUP_EN=GPIO_PULLUP_ENABLE'",
+        "'-D CST816S_I2C_CONFIG_SCL_PULLUP_EN=GPIO_PULLUP_ENABLE'",
+        "'-D CST816S_I2C_CONFIG_MASTER_CLK_SPEED=400000'",
+        "'-D CST816S_I2C_CONFIG_CLK_FLAGS=0'",
+        "'-D CST816S_IO_I2C_CONFIG_DEV_ADDR=ESP_LCD_TOUCH_IO_I2C_CST816S_ADDRESS'",
+        "'-D CST816S_IO_I2C_CONFIG_CONTROL_PHASE_BYTES=1'",
+        "'-D CST816S_IO_I2C_CONFIG_DC_BIT_OFFSET=0'",
+        "'-D CST816S_IO_I2C_CONFIG_LCD_CMD_BITS=8'",
+        "'-D CST816S_IO_I2C_CONFIG_LCD_PARAM_BITS=0'",
+        "'-D CST816S_IO_I2C_CONFIG_FLAGS_DC_LOW_ON_DATA=false'",
+        "'-D CST816S_IO_I2C_CONFIG_FLAGS_DISABLE_CONTROL_PHASE=true'",
+        "'-D CST816S_TOUCH_CONFIG_X_MAX=LCD_WIDTH'",
+        "'-D CST816S_TOUCH_CONFIG_Y_MAX=LCD_HEIGHT'",
+        "'-D CST816S_TOUCH_CONFIG_RST_GPIO_NUM=GPIO_NUM_NC'",
+        "'-D CST816S_TOUCH_CONFIG_INT_GPIO_NUM=GPIO_NUM_NC'",
+        "'-D CST816S_TOUCH_CONFIG_LEVELS_RESET=0'",
+        "'-D CST816S_TOUCH_CONFIG_LEVELS_INTERRUPT=0'",
+        "'-D TOUCH_SWAP_XY=false'",
+        "'-D TOUCH_SWAP_X=false'",
+        "'-D TOUCH_SWAP_Y=false'",
+        "'-D BOARD_HAS_TF'",
+        "'-D TF_CS=5'",
+        "'-D TF_SPI_MOSI=23'",
+        "'-D TF_SPI_SCLK=18'",
+        "'-D TF_SPI_MISO=19'",
+        "'-D BOARD_HAS_SPEAK'",
+        "'-D SPEAK=26'",
+
+        "-DCYD_SCREEN_GAP_PX=8",
+        "-DCYD_SCREEN_MIN_BUTTON_HEIGHT_PX=35",
+        "-DCYD_SCREEN_MIN_BUTTON_WIDTH_PX=35",
+	"-DCYD_SCREEN_VERTICAL=1",
+        "-DCYD_SCREEN_FONT=lv_font_montserrat_14",
+        "-DCYD_SCREEN_FONT_SMALL=lv_font_montserrat_10",
+        "-DCYD_SCREEN_SIDEBAR_SIZE_PX=40",
+        "-DCYD_SCREEN_DRIVER_ESP32_SMARTDISPLAY=1",
+        "-DCYD_SCREEN_DISABLE_TOUCH_CALIBRATION=1",
+        "-DCYD_SCREEN_DISABLE_INVERT_COLORS=1"
+      ],
+      "f_cpu": "240000000L",
+      "f_flash": "40000000L",
+      "flash_mode": "dio",
+      "mcu": "esp32",
+      "variant": "esp32"
+    },
+    "connectivity": [
+      "wifi",
+      "bluetooth",
+      "ethernet",
+      "can"
+    ],
+    "debug": {
+      "openocd_board": "esp-wroom-32.cfg"
+    },
+    "frameworks": [
+      "arduino",
+      "espidf"
+    ],
+    "name": "esp32-2432S022C-V",
+    "upload": {
+      "flash_size": "4MB",
+      "maximum_ram_size": 327680,
+      "maximum_size": 4194304,
+      "require_upload_port": true,
+      "speed": 460800
+    },
+    "url": "https://www.aliexpress.com/item/1005006284154750.html",
+    "vendor": "Sunton"
+  }

CYD-Klipper/platformio.ini

@@ -92,6 +92,9 @@ board = esp32-8048S043C-smartdisplay
 [env:esp32-8048S043C-SD-alt]
 board = esp32-8048S043C-smartdisplay-alt
 
+[env:esp32-2432S022C-SD-V]
+board = esp32-2432S022C-vertical
+
 [env:esp32-CROWPANEL-28R]
 board = esp32-CROWPANEL-28R
 lib_deps = 
@@ -113,3 +116,4 @@ lib_deps =
 	plageoj/UrlEncode@^1.0.1
 	knolleary/PubSubClient@^2.8
 	WiFiClientSecure
+

README.md

@@ -2,9 +2,10 @@
 [![Donations](https://img.shields.io/badge/Support%20on-Ko--Fi-red)](https://ko-fi.com/suchmememanyskill)
 
 # CYD-Klipper
-An implementation of a wireless Klipper status display on an ESP32 + screen. Uses Moonraker to fetch data.
+An implementation of a wireless Klipper, Bambu and Octoprint status display on an ESP32 + screen. Uses Moonraker to fetch data.
 
 A simple and cheap solution to use a dedicated screen with Klipper, a 3d printing Firmware.
+Also now with Bambu Lab and Octoprint printers!
 
 ![showcase_image](readme/PXL_20231113_171629383.jpg)
 
@@ -24,6 +25,8 @@ A ESP32-2432S028R is required to run this project. You can find out where to buy
 - Toggle Moonraker power devices
 - OTA updates
 - Serial console over USB (115200 8n1, echo off, LF/LF)
+- Control Klipper, Octoprint and Bambu printers.
+- Wired Serial/Usb Klipper connection
 
 ### Install
 

_site/index.html

@@ -71,7 +71,7 @@
 <body>
   <section class="main">
     <h2>CYD-Klipper <span class="iconify" data-icon="mdi-printer-3d" style="color: #F44;"></span></h2>
-    <p>An implementation of a Klipper status display on an ESP32 + screen.<br>Uses Moonraker to fetch data.<br><a href="https://github.com/suchmememanyskill/CYD-Klipper">Source code is available on GitHub</a>.</p>
+    <p>An implementation of a wireless Klipper, Bambu and Octoprint status display on an ESP32 + screen.<br>Uses Moonraker to fetch data.<br><a href="https://github.com/suchmememanyskill/CYD-Klipper">Source code is available on GitHub</a>.</p>
 
     <section class="changelog">
       <h3 id="changelog-header"><span class="iconify" data-icon="mdi-hammer-wrench" style="color: lightgray;"></span> Changelog <span id="changelog-header-version"></span></h3>