feat: add Guition JC8048W550 display support (#185)

* Update readme * Update README.md * Add aliexpress links * feat: add Guition JC8048W550 display support * feat: adjust configuration for board * feat: add option for jc8048w550 on page and in ci script * fix: missing CYD_PORTS entry --------- Co-authored-by: Sims <38142618+suchmememanyskill@users.noreply.github.com>
2026-03-20 21:23:25 +00:00 · 2025-05-02 23:42:06 +02:00
parent 04a3b78b21
commit 5b7770246e
5 changed files with 213 additions and 10 deletions
--- a/CYD-Klipper/boards/esp32-JC8048W550.json
+++ b/CYD-Klipper/boards/esp32-JC8048W550.json
@@ -0,0 +1,142 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_16MB.csv",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "'-D ARDUINO_ESP32S3_DEV'",
+      "'-D BOARD_HAS_PSRAM'",
+      "'-D ARDUINO_USB_MODE=1'",
+      "'-D ARDUINO_RUNNING_CORE=1'",
+      "'-D ARDUINO_EVENT_RUNNING_CORE=1'",
+      "'-D ARDUINO_USB_CDC_ON_BOOT=0'",
+      "'-D JC8048W550'",
+      "'-D LCD_WIDTH=800'",
+      "'-D LCD_HEIGHT=480'",
+      "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'",
+      "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
+      "'-D GPIO_BCKL=2'",
+      "'-D LCD_ST7262_PAR'",
+      "'-D ST7262_PANEL_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_PCLK_HZ=(14.2*1000000)'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_H_RES=LCD_WIDTH'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_V_RES=LCD_HEIGHT'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_HSYNC_PULSE_WIDTH=4'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_HSYNC_BACK_PORCH=8'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_HSYNC_FRONT_PORCH=8'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_VSYNC_PULSE_WIDTH=4'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_VSYNC_BACK_PORCH=8'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_VSYNC_FRONT_PORCH=8'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_HSYNC_IDLE_LOW=false'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_VSYNC_IDLE_LOW=false'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_DE_IDLE_HIGH=false'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_PCLK_ACTIVE_NEG=true'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_PCLK_IDLE_HIGH=false'",
+      "'-D ST7262_PANEL_CONFIG_DATA_WIDTH=16'",
+      "'-D ST7262_PANEL_CONFIG_SRAM_TRANS_ALIGN=4'",
+      "'-D ST7262_PANEL_CONFIG_PSRAM_TRANS_ALIGN=64'",
+      "'-D ST7262_PANEL_CONFIG_HSYNC_GPIO_NUM=39'",
+      "'-D ST7262_PANEL_CONFIG_VSYNC_GPIO_NUM=41'",
+      "'-D ST7262_PANEL_CONFIG_DE_GPIO_NUM=40'",
+      "'-D ST7262_PANEL_CONFIG_PCLK_GPIO_NUM=42'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R0=8'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R1=3'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R2=46'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R3=9'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R4=1'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G0=5'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G1=6'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G2=7'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G3=15'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G4=16'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G5=4'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B0=45'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B1=48'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B2=47'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B3=21'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B4=14'",
+      "'-D ST7262_PANEL_CONFIG_DISP_GPIO_NUM=GPIO_NUM_NC'",
+      "'-D ST7262_PANEL_CONFIG_FLAGS_DISP_ACTIVE_LOW=false'",
+      "'-D ST7262_PANEL_CONFIG_FLAGS_RELAX_ON_IDLE=false'",
+      "'-D ST7262_PANEL_CONFIG_FLAGS_FB_IN_PSRAM=true'",
+      "'-D BOARD_HAS_TOUCH'",
+      "'-D TOUCH_GT911_I2C'",
+      "'-D GT911_I2C_HOST=I2C_NUM_0'",
+      "'-D GT911_I2C_CONFIG_SDA_IO_NUM=19'",
+      "'-D GT911_I2C_CONFIG_SCL_IO_NUM=20'",
+      "'-D GT911_I2C_CONFIG_SDA_PULLUP_EN=GPIO_PULLUP_DISABLE'",
+      "'-D GT911_I2C_CONFIG_SCL_PULLUP_EN=GPIO_PULLUP_DISABLE'",
+      "'-D GT911_I2C_CONFIG_MASTER_CLK_SPEED=400000'",
+      "'-D GT911_I2C_CONFIG_CLK_FLAGS=I2C_SCLK_SRC_FLAG_FOR_NOMAL'",
+      "'-D GT911_IO_I2C_CONFIG_DEV_ADDR=ESP_LCD_TOUCH_IO_I2C_GT911_ADDRESS'",
+      "'-D GT911_IO_I2C_CONFIG_CONTROL_PHASE_BYTES=1'",
+      "'-D GT911_IO_I2C_CONFIG_DC_BIT_OFFSET=0'",
+      "'-D GT911_IO_I2C_CONFIG_LCD_CMD_BITS=16'",
+      "'-D GT911_IO_I2C_CONFIG_LCD_PARAM_BITS=0'",
+      "'-D GT911_IO_I2C_CONFIG_FLAGS_DC_LOW_ON_DATA=false'",
+      "'-D GT911_IO_I2C_CONFIG_FLAGS_DISABLE_CONTROL_PHASE=true'",
+      "'-D GT911_TOUCH_CONFIG_X_MAX=LCD_WIDTH'",
+      "'-D GT911_TOUCH_CONFIG_Y_MAX=LCD_HEIGHT'",
+      "'-D GT911_TOUCH_CONFIG_RST_GPIO_NUM=38'",
+      "'-D GT911_TOUCH_CONFIG_INT_GPIO_NUM=18'",
+      "'-D GT911_TOUCH_CONFIG_LEVELS_RESET=0'",
+      "'-D GT911_TOUCH_CONFIG_LEVELS_INTERRUPT=0'",
+      "'-D TOUCH_SWAP_XY=false'",
+      "'-D TOUCH_SWAP_X=false'",
+      "'-D TOUCH_SWAP_Y=false'",
+      "'-D BOARD_HAS_TF'",
+      "'-D TF_CS=10'",
+      "'-D TF_SPI_MOSI=11'",
+      "'-D TF_SPI_SCLK=12'",
+      "'-D TF_SPI_MISO=13'",
+      "-DCYD_SCREEN_HEIGHT_PX=LCD_HEIGHT",
+      "-DCYD_SCREEN_WIDTH_PX=LCD_WIDTH",
+      "-DROTATION_INVERTED=LV_DISP_ROT_180",
+      "-DROTATION_NORMAL=LV_DISP_ROT_NONE",
+      "-DCYD_SCREEN_GAP_PX=15",
+      "-DCYD_SCREEN_MIN_BUTTON_HEIGHT_PX=60",
+      "-DCYD_SCREEN_MIN_BUTTON_WIDTH_PX=60",
+      "-DCYD_SCREEN_FONT=lv_font_montserrat_22",
+      "-DCYD_SCREEN_FONT_SMALL=lv_font_montserrat_16",
+      "-DCYD_SCREEN_SIDEBAR_SIZE_PX=70",
+      "-DCYD_SCREEN_DRIVER_ESP32_SMARTDISPLAY=0",
+      "-DCYD_SCREEN_DISABLE_TOUCH_CALIBRATION=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [
+      [
+        "0x303A",
+        "0x1001"
+      ]
+    ],
+    "mcu": "esp32s3",
+    "variant": "esp32s3"
+  },
+  "connectivity": [
+    "wifi"
+  ],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": [
+    "arduino",
+    "espidf"
+  ],
+  "name": "esp32-JC8048W550",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 460800
+  },
+  "url": "https://www.aliexpress.com/item/1005006715581887.html",
+  "vendor": "Guition"
+}
--- a/CYD-Klipper/platformio.ini
+++ b/CYD-Klipper/platformio.ini
@@ -117,3 +117,6 @@ lib_deps =
 	knolleary/PubSubClient@^2.8
 	WiFiClientSecure

+
+[env:esp32-JC8048W550]
+board = esp32-JC8048W550
--- a/README.md
+++ b/README.md
@@ -42,6 +42,21 @@ If you found this project helpful, please consider a donation [to my Ko-Fi](http

 Thank you!

+### Where to buy hardware
+All links below are affiliate links. Please also check yourself if there is a cheaper version available than the ones below. I have only linked ones that i have personally bought.
+
+*ESP32-2432S028R (2.8" Resistive, Cheapest)*
+- [USB C + microB version](https://s.click.aliexpress.com/e/_omjsYBJ)
+- [Another USB C + microB version](https://s.click.aliexpress.com/e/_olKBkmz)
+- [microB version](https://s.click.aliexpress.com/e/_oCWhgmN)
+
+*ESP32-2432S032C (3.2" Capacitive)*
+- [Only the capacitive version is supported! USB-C](https://s.click.aliexpress.com/e/_okbSGmd)
+- [IPS version (not that great of a screen), Only the capacitive version is supported! USB-C](https://s.click.aliexpress.com/e/_oFygVwt)
+
+*ESP32-3248S035C (3.5" Capacitive)*
+- [microB version](https://s.click.aliexpress.com/e/_oCqygE9)
+
 ### Screenshots
 (Quite literally shots of the screen. I'm sorry)

--- a/_site/index.html
+++ b/_site/index.html
@@ -8,7 +8,7 @@
      font-family: 'Roboto', sans-serif;
    }

-        TT {
+    TT {
      font-family: 'Terminal', monospace;
          background-color: #080a0b;
    }
@@ -24,7 +24,8 @@
      max-width: 750px;
    }

-    .main > section > :not(:first-child) {
+    .main > section > :not(:first-child),
+    .indent {
      margin-left: 20px;
    }

@@ -44,6 +45,17 @@
    #changelog-body {
      white-space: break-spaces;
    }
+
+    .where-to-get details summary::marker
+    {
+      content: '';
+    }
+
+    .where-to-get details[open] summary p 
+    {
+      display: none;
+    }
+
  </style>
  <script type="module" src="https://unpkg.com/esp-web-tools@9/dist/web/install-button.js?module"></script>
  <script src="//code.iconify.design/1/1.0.6/iconify.min.js"></script>
@@ -83,6 +95,34 @@
      <p>If you found this project helpful, please consider a donation to <a href="https://ko-fi.com/suchmememanyskill">my Ko-Fi</a>.<br>It would help out a lot in the development of this project, due to the need to buy the screens.<br>Thank you!</p>
    </section>

+    <section class="where-to-get">
+      <details>
+        <summary>
+          <h3><span class="iconify" data-icon="mdi-shopping" style="color:orange; filter: drop-shadow(0 0 0.75rem orange);"></span> Where to buy hardware</h3>
+          <p class="indent">(Click to expand)</p>
+        </summary>
+        <section class="indent">
+          <p>All links below are affiliate links. Please also check yourself if there is a cheaper version available than the ones below. I have only linked ones that i have personally bought.</p>
+          <i>ESP32-2432S028R (2.8" Resistive, Cheapest)</i>
+          <ul>
+            <li><a href="https://s.click.aliexpress.com/e/_omjsYBJ">USB C + microB version</a></li>
+            <li><a href="https://s.click.aliexpress.com/e/_olKBkmz">Another USB C + microB version</a></li>
+            <li><a href="https://s.click.aliexpress.com/e/_oCWhgmN">microB version</a></li>
+          </ul>
+          <i>ESP32-2432S032C (3.2" Capacitive)</i>
+          <ul>
+            <li><a href="https://s.click.aliexpress.com/e/_okbSGmd">Only the capacitive version is supported! USB-C</a></li>
+            <li><a href="https://s.click.aliexpress.com/e/_oFygVwt">IPS version (not that great of a screen), Only the capacitive version is supported! USB-C</a></li>
+          </ul>
+          <i>ESP32-3248S035C (3.5" Capacitive)</i>
+          <ul>
+            <li><a href="https://s.click.aliexpress.com/e/_oCqygE9">microB version</a></li>
+          </ul>
+        </section>
+      </details>
+
+    </section>
+
    <section class="issues">
      <h3><span class="iconify" data-icon="mdi-github" style="color: white; filter: drop-shadow(0 0 0.75rem gray);"></span> Report Issues</h3>
      <p>If you experience any issues with this project, or have any feature requests for the project, please report them on the <a href="https://github.com/suchmememanyskill/CYD-Klipper/issues">issues tab on Github</a>.</p>
@@ -101,6 +141,7 @@
        <option value="esp32-8048S043C-SD">ESP32-8048S043 (4.3" 800x480 Capacitive)</option>
        <option value="esp32-8048S043C-SD-alt">ESP32-8048S043 Alt (4.3" 800x480 Capacitive)</option>
        <option value="esp32-CROWPANEL-28R">ESP32-CROWPANEL-28R (2.8" Resistive)</option>
+        <option value="esp32-JC8048W550">Guition JC8048W550 (5" Capacitive)</option>
        <option value="esp32-CROWPANEL-35C">ESP32-CROWPANEL-35C (3.5" Capacitive)</option>
      </select>
      <span id="install-btn"></span>
--- a/ci.py
+++ b/ci.py
@@ -12,6 +12,7 @@ CYD_PORTS = [
    #"esp32-4827S043R-SD",
    "esp32-CROWPANEL-28R",
    "esp32-CROWPANEL-35C",
+    "esp32-JC8048W550",
 ]

 ESP_S3_CHIPS = [
@@ -19,6 +20,7 @@ ESP_S3_CHIPS = [
    "esp32-8048S043C-SD-alt",
    "esp32-4827S043C-SD",
    "esp32-CROWPANEL-35C",
+    "esp32-JC8048W550",
 ]

 BASE_DIR = os.getcwd()