Add 2432S024C-smartdisplay

CYD-Klipper/boards/esp32-2432S024C-smartdisplay.json

@@ -0,0 +1,122 @@
+{
+    "build": {
+      "arduino": {
+        "ldscript": "esp32_out.ld"
+      },
+      "core": "esp32",
+      "extra_flags": [
+        "'-D ARDUINO_ESP32_DEV'",
+        "'-D ESP32_2432S024C'",
+        "'-D LCD_WIDTH=240'",
+        "'-D LCD_HEIGHT=320'",
+        "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'",
+        "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
+        "'-D BCKL=27'",
+        "'-D LCD_ILI9341_SPI'",
+        "'-D ILI9341_SPI_HOST=SPI2_HOST'",
+        "'-D ILI9341_SPI_DMA_CHANNEL=SPI_DMA_CH_AUTO'",
+        "'-D ILI9341_SPI_BUS_MOSI_IO_NUM=13'",
+        "'-D ILI9341_SPI_BUS_MISO_IO_NUM=12'",
+        "'-D ILI9341_SPI_BUS_SCLK_IO_NUM=14'",
+        "'-D ILI9341_SPI_BUS_QUADWP_IO_NUM=GPIO_NUM_NC'",
+        "'-D ILI9341_SPI_BUS_QUADHD_IO_NUM=GPIO_NUM_NC'",
+        "'-D ILI9341_SPI_BUS_MAX_TRANSFER_SZ=0'",
+        "'-D ILI9341_SPI_BUS_FLAGS=0'",
+        "'-D ILI9341_SPI_BUS_INTR_FLAGS=0'",
+        "'-D ILI9341_SPI_CONFIG_CS_GPIO_NUM=15'",
+        "'-D ILI9341_SPI_CONFIG_DC_GPIO_NUM=2'",
+        "'-D ILI9341_SPI_CONFIG_SPI_MODE=SPI_MODE0'",
+        "'-D ILI9341_SPI_CONFIG_PCLK_HZ=24000000'",
+        "'-D ILI9341_SPI_CONFIG_TRANS_QUEUE_DEPTH=10'",
+        "'-D ILI9341_SPI_CONFIG_LCD_CMD_BITS=8'",
+        "'-D ILI9341_SPI_CONFIG_LCD_PARAM_BITS=8'",
+        "'-D ILI9341_SPI_CONFIG_FLAGS_DC_AS_CMD_PHASE=false'",
+        "'-D ILI9341_SPI_CONFIG_FLAGS_DC_LOW_ON_DATA=false'",
+        "'-D ILI9341_SPI_CONFIG_FLAGS_OCTAL_MODE=false'",
+        "'-D ILI9341_SPI_CONFIG_FLAGS_LSB_FIRST=false'",
+        "'-D ILI9341_DEV_CONFIG_RESET_GPIO_NUM=GPIO_NUM_NC'",
+        "'-D ILI9341_DEV_CONFIG_COLOR_SPACE=ESP_LCD_COLOR_SPACE_BGR'",
+        "'-D ILI9341_DEV_CONFIG_BITS_PER_PIXEL=16'",
+        "'-D ILI9341_DEV_CONFIG_FLAGS_RESET_ACTIVE_HIGH=false'",
+        "'-D ILI9341_DEV_CONFIG_VENDOR_CONFIG=NULL'",
+        "'-D LCD_SWAP_XY=false'",
+        "'-D LCD_MIRROR_X=true'",
+        "'-D LCD_MIRROR_Y=false'",
+        "'-D BOARD_HAS_TOUCH'",
+        "'-D TOUCH_CST816S_I2C'",
+        "'-D CST816S_I2C_HOST=0'",
+        "'-D CST816S_I2C_CONFIG_SDA_IO_NUM=33'",
+        "'-D CST816S_I2C_CONFIG_SCL_IO_NUM=32'",
+        "'-D CST816S_I2C_CONFIG_SDA_PULLUP_EN=GPIO_PULLUP_ENABLE'",
+        "'-D CST816S_I2C_CONFIG_SCL_PULLUP_EN=GPIO_PULLUP_ENABLE'",
+        "'-D CST816S_I2C_CONFIG_MASTER_CLK_SPEED=400000'",
+        "'-D CST816S_I2C_CONFIG_CLK_FLAGS=0'",
+        "'-D CST816S_IO_I2C_CONFIG_DEV_ADDR=ESP_LCD_TOUCH_IO_I2C_CST816S_ADDRESS'",
+        "'-D CST816S_IO_I2C_CONFIG_CONTROL_PHASE_BYTES=1'",
+        "'-D CST816S_IO_I2C_CONFIG_DC_BIT_OFFSET=0'",
+        "'-D CST816S_IO_I2C_CONFIG_LCD_CMD_BITS=8'",
+        "'-D CST816S_IO_I2C_CONFIG_LCD_PARAM_BITS=0'",
+        "'-D CST816S_IO_I2C_CONFIG_FLAGS_DC_LOW_ON_DATA=false'",
+        "'-D CST816S_IO_I2C_CONFIG_FLAGS_DISABLE_CONTROL_PHASE=true'",
+        "'-D CST816S_TOUCH_CONFIG_X_MAX=LCD_WIDTH'",
+        "'-D CST816S_TOUCH_CONFIG_Y_MAX=LCD_HEIGHT'",
+        "'-D CST816S_TOUCH_CONFIG_RST_GPIO_NUM=25'",
+        "'-D CST816S_TOUCH_CONFIG_INT_GPIO_NUM=21'",
+        "'-D CST816S_TOUCH_CONFIG_LEVELS_RESET=0'",
+        "'-D CST816S_TOUCH_CONFIG_LEVELS_INTERRUPT=0'",
+        "'-D TOUCH_SWAP_XY=false'",      
+        "'-D TOUCH_SWAP_X=false'",
+        "'-D TOUCH_SWAP_Y=false'",
+        "'-D BOARD_HAS_TF'",
+        "'-D TF_CS=5'",
+        "'-D TF_SPI_MOSI=23'",
+        "'-D TF_SPI_SCLK=18'",
+        "'-D TF_SPI_MISO=19'",
+        "'-D BOARD_HAS_RGB_LED'",
+        "'-D RGB_LED_R=4'",
+        "'-D RGB_LED_G=16'",
+        "'-D RGB_LED_B=17'",
+        "'-D BOARD_HAS_CDS'",
+        "'-D CDS=34'",
+        "'-D BOARD_HAS_SPEAK'",
+        "'-D SPEAK=26'",
+
+        "-DCYD_SCREEN_GAP_PX=8",
+        "-DCYD_SCREEN_MIN_BUTTON_HEIGHT_PX=35",
+        "-DCYD_SCREEN_MIN_BUTTON_WIDTH_PX=35",
+        "-DCYD_SCREEN_FONT=lv_font_montserrat_14",
+        "-DCYD_SCREEN_FONT_SMALL=lv_font_montserrat_10",
+        "-DCYD_SCREEN_SIDEBAR_SIZE_PX=40",
+        "-DCYD_SCREEN_DRIVER_ESP32_SMARTDISPLAY=1",
+        "-DCYD_SCREEN_DISABLE_TOUCH_CALIBRATION=1"
+      ],
+      "f_cpu": "240000000L",
+      "f_flash": "40000000L",
+      "flash_mode": "dio",
+      "mcu": "esp32",
+      "variant": "esp32"
+    },
+    "connectivity": [
+      "wifi",
+      "bluetooth",
+      "ethernet",
+      "can"
+    ],
+    "debug": {
+      "openocd_board": "esp-wroom-32.cfg"
+    },
+    "frameworks": [
+      "arduino",
+      "espidf"
+    ],
+    "name": "esp32-2432S024C-SD",
+    "upload": {
+      "flash_size": "4MB",
+      "maximum_ram_size": 327680,
+      "maximum_size": 4194304,
+      "require_upload_port": true,
+      "speed": 460800
+    },
+    "url": "https://www.aliexpress.com/item/1005005865107357.html",
+    "vendor": "Sunton"
+  }

CYD-Klipper/boards/esp32-4827S043C-smartdisplay.json

@@ -128,7 +128,7 @@
     "arduino",
     "espidf"
   ],
-  "name": "esp32-4827S043C",
+  "name": "esp32-4827S043C-SD",
   "upload": {
     "flash_size": "16MB",
     "maximum_ram_size": 327680,

CYD-Klipper/platformio.ini

@@ -43,6 +43,9 @@ lib_deps =
 	bblanchon/ArduinoJson@^7.0.0
 	plageoj/UrlEncode@^1.0.1
 
+[env:esp32-2432S024C-SD]
+board = esp32-2432S024C-smartdisplay
+
 [env:esp32-2432S028Rv1-SD]
 board = esp32-2432S028RV1-smartdisplay