Add alt for esp32-8048S043C-SD (#135)

CYD-Klipper/boards/esp32-8048S043C-smartdisplay-alt.json

@@ -0,0 +1,143 @@
+{
+    "build": {
+      "arduino": {
+        "ldscript": "esp32s3_out.ld",
+        "partitions": "default_16MB.csv",
+        "memory_type": "qio_opi"
+      },
+      "core": "esp32",
+      "extra_flags": [
+        "'-D ARDUINO_ESP32S3_DEV'",
+        "'-D BOARD_HAS_PSRAM'",
+        "'-D ARDUINO_USB_MODE=1'",
+        "'-D ARDUINO_RUNNING_CORE=1'",
+        "'-D ARDUINO_EVENT_RUNNING_CORE=1'",
+        "'-D ARDUINO_USB_CDC_ON_BOOT=0'",
+        "'-D ESP32_8048S043C'",
+        "'-D LCD_WIDTH=800'",
+        "'-D LCD_HEIGHT=480'",
+        "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'",
+        "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
+        "'-D GPIO_BCKL=2'",
+        "'-D LCD_ST7262_PAR'",
+        "'-D ST7262_PANEL_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_PCLK_HZ=14000000'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_H_RES=LCD_WIDTH'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_V_RES=LCD_HEIGHT'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_HSYNC_PULSE_WIDTH=4'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_HSYNC_BACK_PORCH=8'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_HSYNC_FRONT_PORCH=8'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_VSYNC_PULSE_WIDTH=4'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_VSYNC_BACK_PORCH=8'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_VSYNC_FRONT_PORCH=8'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_HSYNC_IDLE_LOW=false'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_VSYNC_IDLE_LOW=false'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_DE_IDLE_HIGH=false'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_PCLK_ACTIVE_NEG=true'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_PCLK_IDLE_HIGH=false'",
+        "'-D ST7262_PANEL_CONFIG_DATA_WIDTH=16'",
+        "'-D ST7262_PANEL_CONFIG_SRAM_TRANS_ALIGN=4'",
+        "'-D ST7262_PANEL_CONFIG_PSRAM_TRANS_ALIGN=64'",
+        "'-D ST7262_PANEL_CONFIG_HSYNC_GPIO_NUM=39'",
+        "'-D ST7262_PANEL_CONFIG_VSYNC_GPIO_NUM=41'",
+        "'-D ST7262_PANEL_CONFIG_DE_GPIO_NUM=40'",
+        "'-D ST7262_PANEL_CONFIG_PCLK_GPIO_NUM=42'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R0=8'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R1=3'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R2=46'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R3=9'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R4=1'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G0=5'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G1=6'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G2=7'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G3=15'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G4=16'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G5=4'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B0=45'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B1=48'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B2=47'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B3=21'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B4=14'",
+        "'-D ST7262_PANEL_CONFIG_DISP_GPIO_NUM=GPIO_NUM_NC'",
+        "'-D ST7262_PANEL_CONFIG_FLAGS_DISP_ACTIVE_LOW=false'",
+        "'-D ST7262_PANEL_CONFIG_FLAGS_RELAX_ON_IDLE=false'",
+        "'-D ST7262_PANEL_CONFIG_FLAGS_FB_IN_PSRAM=true'",
+        "'-D BOARD_HAS_TOUCH'",
+        "'-D TOUCH_GT911_I2C'",
+        "'-D GT911_I2C_HOST=I2C_NUM_0'",
+        "'-D GT911_I2C_CONFIG_SDA_IO_NUM=19'",
+        "'-D GT911_I2C_CONFIG_SCL_IO_NUM=20'",
+        "'-D GT911_I2C_CONFIG_SDA_PULLUP_EN=GPIO_PULLUP_DISABLE'",
+        "'-D GT911_I2C_CONFIG_SCL_PULLUP_EN=GPIO_PULLUP_DISABLE'",
+        "'-D GT911_I2C_CONFIG_MASTER_CLK_SPEED=400000'",
+        "'-D GT911_I2C_CONFIG_CLK_FLAGS=I2C_SCLK_SRC_FLAG_FOR_NOMAL'",
+        "'-D GT911_IO_I2C_CONFIG_DEV_ADDR=ESP_LCD_TOUCH_IO_I2C_GT911_ADDRESS'",
+        "'-D GT911_IO_I2C_CONFIG_CONTROL_PHASE_BYTES=1'",
+        "'-D GT911_IO_I2C_CONFIG_DC_BIT_OFFSET=0'",
+        "'-D GT911_IO_I2C_CONFIG_LCD_CMD_BITS=16'",
+        "'-D GT911_IO_I2C_CONFIG_LCD_PARAM_BITS=0'",
+        "'-D GT911_IO_I2C_CONFIG_FLAGS_DC_LOW_ON_DATA=false'",
+        "'-D GT911_IO_I2C_CONFIG_FLAGS_DISABLE_CONTROL_PHASE=true'",
+        "'-D GT911_TOUCH_CONFIG_X_MAX=LCD_WIDTH'",
+        "'-D GT911_TOUCH_CONFIG_Y_MAX=LCD_HEIGHT'",
+        "'-D GT911_TOUCH_CONFIG_RST_GPIO_NUM=38'",
+        "'-D GT911_TOUCH_CONFIG_INT_GPIO_NUM=18'",
+        "'-D GT911_TOUCH_CONFIG_LEVELS_RESET=0'",
+        "'-D GT911_TOUCH_CONFIG_LEVELS_INTERRUPT=0'",
+        "'-D TOUCH_SWAP_XY=false'",
+        "'-D TOUCH_SWAP_X=false'",
+        "'-D TOUCH_SWAP_Y=false'",
+        "'-D BOARD_HAS_TF'",
+        "'-D TF_CS=10'",
+        "'-D TF_SPI_MOSI=11'",
+        "'-D TF_SPI_SCLK=12'",
+        "'-D TF_SPI_MISO=13'",
+
+        "-DCYD_SCREEN_HEIGHT_PX=480",
+        "-DCYD_SCREEN_WIDTH_PX=800",
+        "-DROTATION_INVERTED=LV_DISP_ROT_180",
+        "-DROTATION_NORMAL=LV_DISP_ROT_NONE",
+        "-DCYD_SCREEN_GAP_PX=15",
+        "-DCYD_SCREEN_MIN_BUTTON_HEIGHT_PX=60",
+        "-DCYD_SCREEN_MIN_BUTTON_WIDTH_PX=60",
+        "-DCYD_SCREEN_FONT=lv_font_montserrat_22",
+        "-DCYD_SCREEN_FONT_SMALL=lv_font_montserrat_16",
+        "-DCYD_SCREEN_SIDEBAR_SIZE_PX=70",
+        "-DCYD_SCREEN_DRIVER_ESP32_SMARTDISPLAY=1",
+        "-DCYD_SCREEN_DISABLE_TOUCH_CALIBRATION=1"
+      ],
+      "f_cpu": "240000000L",
+      "f_flash": "80000000L",
+      "flash_mode": "qio",
+      "hwids": [
+        [
+          "0x303A",
+          "0x1001"
+        ]
+      ],
+      "mcu": "esp32s3",
+      "variant": "esp32s3"
+    },
+    "connectivity": [
+      "wifi"
+    ],
+    "debug": {
+      "openocd_target": "esp32s3.cfg"
+    },
+    "frameworks": [
+      "arduino",
+      "espidf"
+    ],
+    "name": "esp32-8048S043C-SD-alt",
+    "upload": {
+      "flash_size": "16MB",
+      "maximum_ram_size": 327680,
+      "maximum_size": 16777216,
+      "use_1200bps_touch": true,
+      "wait_for_upload_port": true,
+      "require_upload_port": true,
+      "speed": 460800
+    },
+    "url": "https://www.aliexpress.com/item/1005006110360174.html",
+    "vendor": "Sunton"
+  }

CYD-Klipper/platformio.ini

@@ -84,3 +84,5 @@ board = esp32-4827S043C-smartdisplay
 [env:esp32-8048S043C-SD]
 board = esp32-8048S043C-smartdisplay
 
+[env:esp32-8048S043C-SD-alt]
+board = esp32-8048S043C-smartdisplay-alt

_site/index.html

@@ -99,6 +99,7 @@
         <option value="esp32-3248S035C-V">ESP32-3248S035 (3.5" Capacitive) Vertical Orientation</option>
         <option value="esp32-4827S043C-SD">ESP32-4827S043 (4.3" 480x270 Capacitive)</option>
         <option value="esp32-8048S043C-SD">ESP32-8048S043 (4.3" 800x480 Capacitive)</option>
+        <option value="esp32-8048S043C-SD-alt">ESP32-8048S043 Alt (4.3" 800x480 Capacitive)</option>
       </select>
       <span id="install-btn"></span>
     </section>

ci.py

@@ -5,6 +5,7 @@ CYD_PORTS = [
     "esp32-2432S028R", 
     "esp32-2432S032C-SD", 
     "esp32-8048S043C-SD",
+    "esp32-8048S043C-SD-alt", 
     "esp32-2432S024C-SD", 
     "esp32-4827S043C-SD",
     "esp32-3248S035C-V",
@@ -13,6 +14,7 @@ CYD_PORTS = [
 
 ESP_S3_CHIPS = [
     "esp32-8048S043C-SD",
+    "esp32-8048S043C-SD-alt",
     "esp32-4827S043C-SD",
 ]