Merge branch 'dev' into printer-interface

CYD-Klipper/boards/esp32-8048S043C-smartdisplay-alt.json

@@ -0,0 +1,143 @@
+{
+    "build": {
+      "arduino": {
+        "ldscript": "esp32s3_out.ld",
+        "partitions": "default_16MB.csv",
+        "memory_type": "qio_opi"
+      },
+      "core": "esp32",
+      "extra_flags": [
+        "'-D ARDUINO_ESP32S3_DEV'",
+        "'-D BOARD_HAS_PSRAM'",
+        "'-D ARDUINO_USB_MODE=1'",
+        "'-D ARDUINO_RUNNING_CORE=1'",
+        "'-D ARDUINO_EVENT_RUNNING_CORE=1'",
+        "'-D ARDUINO_USB_CDC_ON_BOOT=0'",
+        "'-D ESP32_8048S043C'",
+        "'-D LCD_WIDTH=800'",
+        "'-D LCD_HEIGHT=480'",
+        "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'",
+        "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
+        "'-D GPIO_BCKL=2'",
+        "'-D LCD_ST7262_PAR'",
+        "'-D ST7262_PANEL_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_PCLK_HZ=14000000'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_H_RES=LCD_WIDTH'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_V_RES=LCD_HEIGHT'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_HSYNC_PULSE_WIDTH=4'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_HSYNC_BACK_PORCH=8'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_HSYNC_FRONT_PORCH=8'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_VSYNC_PULSE_WIDTH=4'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_VSYNC_BACK_PORCH=8'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_VSYNC_FRONT_PORCH=8'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_HSYNC_IDLE_LOW=false'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_VSYNC_IDLE_LOW=false'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_DE_IDLE_HIGH=false'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_PCLK_ACTIVE_NEG=true'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_PCLK_IDLE_HIGH=false'",
+        "'-D ST7262_PANEL_CONFIG_DATA_WIDTH=16'",
+        "'-D ST7262_PANEL_CONFIG_SRAM_TRANS_ALIGN=4'",
+        "'-D ST7262_PANEL_CONFIG_PSRAM_TRANS_ALIGN=64'",
+        "'-D ST7262_PANEL_CONFIG_HSYNC_GPIO_NUM=39'",
+        "'-D ST7262_PANEL_CONFIG_VSYNC_GPIO_NUM=41'",
+        "'-D ST7262_PANEL_CONFIG_DE_GPIO_NUM=40'",
+        "'-D ST7262_PANEL_CONFIG_PCLK_GPIO_NUM=42'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R0=8'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R1=3'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R2=46'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R3=9'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R4=1'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G0=5'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G1=6'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G2=7'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G3=15'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G4=16'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G5=4'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B0=45'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B1=48'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B2=47'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B3=21'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B4=14'",
+        "'-D ST7262_PANEL_CONFIG_DISP_GPIO_NUM=GPIO_NUM_NC'",
+        "'-D ST7262_PANEL_CONFIG_FLAGS_DISP_ACTIVE_LOW=false'",
+        "'-D ST7262_PANEL_CONFIG_FLAGS_RELAX_ON_IDLE=false'",
+        "'-D ST7262_PANEL_CONFIG_FLAGS_FB_IN_PSRAM=true'",
+        "'-D BOARD_HAS_TOUCH'",
+        "'-D TOUCH_GT911_I2C'",
+        "'-D GT911_I2C_HOST=I2C_NUM_0'",
+        "'-D GT911_I2C_CONFIG_SDA_IO_NUM=19'",
+        "'-D GT911_I2C_CONFIG_SCL_IO_NUM=20'",
+        "'-D GT911_I2C_CONFIG_SDA_PULLUP_EN=GPIO_PULLUP_DISABLE'",
+        "'-D GT911_I2C_CONFIG_SCL_PULLUP_EN=GPIO_PULLUP_DISABLE'",
+        "'-D GT911_I2C_CONFIG_MASTER_CLK_SPEED=400000'",
+        "'-D GT911_I2C_CONFIG_CLK_FLAGS=I2C_SCLK_SRC_FLAG_FOR_NOMAL'",
+        "'-D GT911_IO_I2C_CONFIG_DEV_ADDR=ESP_LCD_TOUCH_IO_I2C_GT911_ADDRESS'",
+        "'-D GT911_IO_I2C_CONFIG_CONTROL_PHASE_BYTES=1'",
+        "'-D GT911_IO_I2C_CONFIG_DC_BIT_OFFSET=0'",
+        "'-D GT911_IO_I2C_CONFIG_LCD_CMD_BITS=16'",
+        "'-D GT911_IO_I2C_CONFIG_LCD_PARAM_BITS=0'",
+        "'-D GT911_IO_I2C_CONFIG_FLAGS_DC_LOW_ON_DATA=false'",
+        "'-D GT911_IO_I2C_CONFIG_FLAGS_DISABLE_CONTROL_PHASE=true'",
+        "'-D GT911_TOUCH_CONFIG_X_MAX=LCD_WIDTH'",
+        "'-D GT911_TOUCH_CONFIG_Y_MAX=LCD_HEIGHT'",
+        "'-D GT911_TOUCH_CONFIG_RST_GPIO_NUM=38'",
+        "'-D GT911_TOUCH_CONFIG_INT_GPIO_NUM=18'",
+        "'-D GT911_TOUCH_CONFIG_LEVELS_RESET=0'",
+        "'-D GT911_TOUCH_CONFIG_LEVELS_INTERRUPT=0'",
+        "'-D TOUCH_SWAP_XY=false'",
+        "'-D TOUCH_SWAP_X=false'",
+        "'-D TOUCH_SWAP_Y=false'",
+        "'-D BOARD_HAS_TF'",
+        "'-D TF_CS=10'",
+        "'-D TF_SPI_MOSI=11'",
+        "'-D TF_SPI_SCLK=12'",
+        "'-D TF_SPI_MISO=13'",
+
+        "-DCYD_SCREEN_HEIGHT_PX=480",
+        "-DCYD_SCREEN_WIDTH_PX=800",
+        "-DROTATION_INVERTED=LV_DISP_ROT_180",
+        "-DROTATION_NORMAL=LV_DISP_ROT_NONE",
+        "-DCYD_SCREEN_GAP_PX=15",
+        "-DCYD_SCREEN_MIN_BUTTON_HEIGHT_PX=60",
+        "-DCYD_SCREEN_MIN_BUTTON_WIDTH_PX=60",
+        "-DCYD_SCREEN_FONT=lv_font_montserrat_22",
+        "-DCYD_SCREEN_FONT_SMALL=lv_font_montserrat_16",
+        "-DCYD_SCREEN_SIDEBAR_SIZE_PX=70",
+        "-DCYD_SCREEN_DRIVER_ESP32_SMARTDISPLAY=1",
+        "-DCYD_SCREEN_DISABLE_TOUCH_CALIBRATION=1"
+      ],
+      "f_cpu": "240000000L",
+      "f_flash": "80000000L",
+      "flash_mode": "qio",
+      "hwids": [
+        [
+          "0x303A",
+          "0x1001"
+        ]
+      ],
+      "mcu": "esp32s3",
+      "variant": "esp32s3"
+    },
+    "connectivity": [
+      "wifi"
+    ],
+    "debug": {
+      "openocd_target": "esp32s3.cfg"
+    },
+    "frameworks": [
+      "arduino",
+      "espidf"
+    ],
+    "name": "esp32-8048S043C-SD-alt",
+    "upload": {
+      "flash_size": "16MB",
+      "maximum_ram_size": 327680,
+      "maximum_size": 16777216,
+      "use_1200bps_touch": true,
+      "wait_for_upload_port": true,
+      "require_upload_port": true,
+      "speed": 460800
+    },
+    "url": "https://www.aliexpress.com/item/1005006110360174.html",
+    "vendor": "Sunton"
+  }

CYD-Klipper/boards/esp32-CROWPANEL-28R.json

@@ -0,0 +1,63 @@
+{
+    "build": {
+      "arduino": {
+        "ldscript": "esp32_out.ld"
+      },
+      "core": "esp32",
+      "extra_flags": [
+        "-DUSER_SETUP_LOADED=1",
+        "-DILI9341_2_DRIVER=1",
+        "-DTFT_BACKLIGHT_ON=HIGH",
+        "-DTFT_BL=27",
+        "-DTFT_MISO=12",
+        "-DTFT_MOSI=13",
+        "-DTFT_SCLK=14",
+        "-DTFT_CS=15",
+        "-DTFT_DC=2",
+        "-DTFT_RST=-1",
+        "-DLOAD_GCLD=1",
+        "-DSPI_FREQUENCY=15999999",
+        "-DSPI_READ_FREQUENCY=20000000",
+        "-DSPI_TOUCH_FREQUENCY=600000",
+        "-DTOUCH_CS=33",
+        
+        "-DCYD_SCREEN_HEIGHT_PX=240",
+        "-DCYD_SCREEN_WIDTH_PX=320",
+        "-DCYD_SCREEN_GAP_PX=8",
+        "-DCYD_SCREEN_MIN_BUTTON_HEIGHT_PX=35",
+        "-DCYD_SCREEN_MIN_BUTTON_WIDTH_PX=35",
+        "-DCYD_SCREEN_FONT=lv_font_montserrat_14",
+        "-DCYD_SCREEN_FONT_SMALL=lv_font_montserrat_10",
+        "-DCYD_SCREEN_SIDEBAR_SIZE_PX=40",
+        "-DCYD_SCREEN_DRIVER_ESP32_CROWPANEL_28R=1"
+      ],
+      "f_cpu": "240000000L",
+      "f_flash": "40000000L",
+      "flash_mode": "dio",
+      "mcu": "esp32",
+      "variant": "esp32"
+    },
+    "connectivity": [
+      "wifi",
+      "bluetooth",
+      "ethernet",
+      "can"
+    ],
+    "debug": {
+      "openocd_board": "esp-wroom-32.cfg"
+    },
+    "frameworks": [
+      "arduino",
+      "espidf"
+    ],
+    "name": "esp32-crowpanel-28R",
+    "upload": {
+      "flash_size": "4MB",
+      "maximum_ram_size": 327680,
+      "maximum_size": 4194304,
+      "require_upload_port": true,
+      "speed": 460800
+    },
+    "url": "https://www.aliexpress.com/item/1005004502250619.html",
+    "vendor": "Sunton"
+  }

CYD-Klipper/platformio.ini

@@ -87,4 +87,18 @@ board = esp32-4827S043C-smartdisplay
 board = esp32-4827S043C-smartdisplay
 
 [env:esp32-8048S043C-SD]
-board = esp32-8048S043C-smartdisplay
+board = esp32-8048S043C-smartdisplay
+
+[env:esp32-8048S043C-SD-alt]
+board = esp32-8048S043C-smartdisplay-alt
+
+[env:esp32-CROWPANEL-28R]
+board = esp32-CROWPANEL-28R
+lib_deps = 
+	SPI
+	https://github.com/suchmememanyskill/lvgl
+	https://github.com/Bodmer/TFT_eSPI.git
+	bblanchon/ArduinoJson@^7.0.0
+	plageoj/UrlEncode@^1.0.1
+	knolleary/PubSubClient@^2.8
+	WiFiClientSecure

CYD-Klipper/src/core/device/ESP32-CROWPANEL_28R.cpp

@@ -0,0 +1,100 @@
+#ifdef CYD_SCREEN_DRIVER_ESP32_CROWPANEL_28R
+#include "../screen_driver.h"
+
+#ifdef CYD_SCREEN_VERTICAL
+    #error "Vertical screen not supported with the ESP32_CROWPANEL_28R driver"
+#endif
+
+#include <SPI.h>
+#include <TFT_eSPI.h>
+#include "../../conf/global_config.h"
+#include "lvgl.h"
+#include <TFT_eSPI.h>
+#include "../lv_setup.h"
+
+#define TOUCH_THRESHOLD 600
+
+static lv_disp_draw_buf_t draw_buf;
+static lv_color_t buf[CYD_SCREEN_HEIGHT_PX * CYD_SCREEN_WIDTH_PX / 10];
+
+TFT_eSPI tft = TFT_eSPI();
+
+uint16_t touchX, touchY;
+
+void screen_setBrightness(byte brightness)
+{
+    // calculate duty, 4095 from 2 ^ 12 - 1
+    uint32_t duty = (4095 / 255) * brightness;
+
+    // write duty to LEDC
+    ledcWrite(0, duty);
+}
+
+void screen_lv_flush(lv_disp_drv_t *disp, const lv_area_t *area, lv_color_t *color_p)
+{
+    uint32_t w = (area->x2 - area->x1 + 1);
+    uint32_t h = (area->y2 - area->y1 + 1);
+
+    tft.startWrite();
+    tft.setAddrWindow(area->x1, area->y1, w, h);
+    tft.pushColors((uint16_t *)&color_p->full, w * h, true);
+    tft.endWrite();
+
+    lv_disp_flush_ready(disp);
+}
+
+void screen_lv_touchRead(lv_indev_drv_t *indev_driver, lv_indev_data_t *data)
+{
+    if (tft.getTouch( &touchX, &touchY, TOUCH_THRESHOLD))
+    {
+        data->state = LV_INDEV_STATE_PR;
+        data->point.x = touchX;
+        data->point.y = touchY;
+    }
+    else
+    {
+        data->state = LV_INDEV_STATE_REL;
+    }
+}
+
+void set_invert_display(){
+    tft.invertDisplay(get_current_printer_config()->invert_colors);
+}
+
+void screen_setup()
+{
+    uint16_t calData[5] = { 189, 3416, 359, 3439, 1};
+
+    lv_init();
+
+    tft.init();
+    tft.fillScreen(TFT_BLACK);
+    tft.invertDisplay(false);
+    delay(300);
+
+    tft.setRotation(1);
+    tft.setTouch( calData );
+
+    ledcSetup(0, 5000, 12);
+    ledcAttachPin(TFT_BL, 0);
+
+    lv_disp_draw_buf_init(&draw_buf, buf, NULL, CYD_SCREEN_HEIGHT_PX * CYD_SCREEN_WIDTH_PX / 10);
+
+    /*Initialize the display*/
+    static lv_disp_drv_t disp_drv;
+    lv_disp_drv_init(&disp_drv);
+    disp_drv.hor_res = CYD_SCREEN_WIDTH_PX;
+    disp_drv.ver_res = CYD_SCREEN_HEIGHT_PX;
+    disp_drv.flush_cb = screen_lv_flush;
+    disp_drv.draw_buf = &draw_buf;
+    lv_disp_drv_register(&disp_drv);
+
+    /*Initialize the (dummy) input device driver*/
+    static lv_indev_drv_t indev_drv;
+    lv_indev_drv_init(&indev_drv);
+    indev_drv.type = LV_INDEV_TYPE_POINTER;
+    indev_drv.read_cb = screen_lv_touchRead;
+    lv_indev_drv_register(&indev_drv);
+}
+
+#endif // CYD_SCREEN_DRIVER_ESP32_CROWPANEL_28R

_site/index.html

@@ -99,6 +99,8 @@
         <option value="esp32-3248S035C-V">ESP32-3248S035 (3.5" Capacitive) Vertical Orientation</option>
         <option value="esp32-4827S043C-SD">ESP32-4827S043 (4.3" 480x270 Capacitive)</option>
         <option value="esp32-8048S043C-SD">ESP32-8048S043 (4.3" 800x480 Capacitive)</option>
+        <option value="esp32-8048S043C-SD-alt">ESP32-8048S043 Alt (4.3" 800x480 Capacitive)</option>
+        <option value="esp32-CROWPANEL-28R">ESP32-CROWPANEL-28R (2.8" Resistive)</option>
       </select>
       <span id="install-btn"></span>
     </section>

ci.py

@@ -4,15 +4,18 @@ CYD_PORTS = [
     "esp32-3248S035C", 
     "esp32-2432S028R", 
     "esp32-2432S032C-SD", 
-    "esp32-8048S043C-SD", 
+    "esp32-8048S043C-SD",
+    "esp32-8048S043C-SD-alt", 
     "esp32-2432S024C-SD", 
     "esp32-4827S043C-SD",
     "esp32-3248S035C-V",
     #"esp32-4827S043R-SD",
+    "esp32-CROWPANEL-28R",
 ]
 
 ESP_S3_CHIPS = [
     "esp32-8048S043C-SD",
+    "esp32-8048S043C-SD-alt",
     "esp32-4827S043C-SD",
 ]