esp32-4827S043R

CYD-Klipper/boards/esp32-4827S043R-smartdisplay.json

@@ -0,0 +1,146 @@
+{
+    "build": {
+      "arduino": {
+        "ldscript": "esp32s3_out.ld",
+        "partitions": "default_16MB.csv",
+        "memory_type": "qio_opi"
+      },
+      "core": "esp32",
+      "extra_flags": [
+        "'-D ARDUINO_ESP32S3_DEV'",
+        "'-D BOARD_HAS_PSRAM'",
+        "'-D ARDUINO_USB_MODE=1'",
+        "'-D ARDUINO_RUNNING_CORE=1'",
+        "'-D ARDUINO_EVENT_RUNNING_CORE=1'",
+        "'-D ARDUINO_USB_CDC_ON_BOOT=0'",
+        "'-D ESP32_4827S043R'",
+        "'-D LCD_WIDTH=480'",
+        "'-D LCD_HEIGHT=272'",
+        "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'",
+        "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
+        "'-D GPIO_BCKL=2'",
+        "'-D LCD_ST7262_PAR'",
+        "'-D ST7262_PANEL_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_PCLK_HZ=(8*1000000)'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_H_RES=LCD_WIDTH'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_V_RES=LCD_HEIGHT'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_HSYNC_PULSE_WIDTH=4'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_HSYNC_BACK_PORCH=43'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_HSYNC_FRONT_PORCH=8'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_VSYNC_PULSE_WIDTH=4'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_VSYNC_BACK_PORCH=12'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_VSYNC_FRONT_PORCH=8'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_HSYNC_IDLE_LOW=true'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_VSYNC_IDLE_LOW=true'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_DE_IDLE_HIGH=false'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_PCLK_ACTIVE_NEG=true'",
+        "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_PCLK_IDLE_HIGH=false'",
+        "'-D ST7262_PANEL_CONFIG_DATA_WIDTH=16'",
+        "'-D ST7262_PANEL_CONFIG_SRAM_TRANS_ALIGN=4'",
+        "'-D ST7262_PANEL_CONFIG_PSRAM_TRANS_ALIGN=64'",
+        "'-D ST7262_PANEL_CONFIG_HSYNC_GPIO_NUM=39'",
+        "'-D ST7262_PANEL_CONFIG_VSYNC_GPIO_NUM=41'",
+        "'-D ST7262_PANEL_CONFIG_DE_GPIO_NUM=40'",
+        "'-D ST7262_PANEL_CONFIG_PCLK_GPIO_NUM=42'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R0=8'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R1=3'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R2=46'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R3=9'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R4=1'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G0=5'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G1=6'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G2=7'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G3=15'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G4=16'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G5=4'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B0=45'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B1=48'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B2=47'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B3=21'",
+        "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B4=14'",
+        "'-D ST7262_PANEL_CONFIG_DISP_GPIO_NUM=GPIO_NUM_NC'",
+        "'-D ST7262_PANEL_CONFIG_FLAGS_DISP_ACTIVE_LOW=false'",
+        "'-D ST7262_PANEL_CONFIG_FLAGS_RELAX_ON_IDLE=false'",
+        "'-D ST7262_PANEL_CONFIG_FLAGS_FB_IN_PSRAM=true'",
+        "'-D BOARD_HAS_TOUCH'",
+        "'-D TOUCH_XPT2046_SPI'",
+        "'-D XPT2046_SPI_HOST=SPI2_HOST'",
+        "'-D XPT2046_SPI_DMA_CHANNEL=SPI_DMA_CH_AUTO'",      
+        "'-D XPT2046_SPI_BUS_MOSI_IO_NUM=11'",
+        "'-D XPT2046_SPI_BUS_MISO_IO_NUM=13'",
+        "'-D XPT2046_SPI_BUS_SCLK_IO_NUM=12'",
+        "'-D XPT2046_SPI_BUS_QUADWP_IO_NUM=GPIO_NUM_NC'",
+        "'-D XPT2046_SPI_BUS_QUADHD_IO_NUM=GPIO_NUM_NC'",
+        "'-D XPT2046_SPI_CONFIG_CS_GPIO_NUM=38'",
+        "'-D XPT2046_SPI_CONFIG_DC_GPIO_NUM=GPIO_NUM_NC'",
+        "'-D XPT2046_SPI_CONFIG_SPI_MODE=SPI_MODE0'",
+        "'-D XPT2046_SPI_CONFIG_PCLK_HZ=2000000'",
+        "'-D XPT2046_SPI_CONFIG_TRANS_QUEUE_DEPTH=3'",
+        "'-D XPT2046_SPI_CONFIG_LCD_CMD_BITS=8'",
+        "'-D XPT2046_SPI_CONFIG_LCD_PARAM_BITS=8'",
+        "'-D XPT2046_SPI_CONFIG_FLAGS_DC_AS_CMD_PHASE=false'",
+        "'-D XPT2046_SPI_CONFIG_FLAGS_DC_LOW_ON_DATA=false'",
+        "'-D XPT2046_SPI_CONFIG_FLAGS_OCTAL_MODE=false'",
+        "'-D XPT2046_SPI_CONFIG_FLAGS_LSB_FIRST=false'",
+        "'-D XPT2046_TOUCH_CONFIG_X_MAX=LCD_WIDTH'",
+        "'-D XPT2046_TOUCH_CONFIG_Y_MAX=LCD_HEIGHT'",
+        "'-D XPT2046_TOUCH_CONFIG_RST_GPIO_NUM=GPIO_NUM_NC'",
+        "'-D XPT2046_TOUCH_CONFIG_INT_GPIO_NUM=18'",
+        "'-D XPT2046_TOUCH_CONFIG_LEVELS_RESET=0'",
+        "'-D XPT2046_TOUCH_CONFIG_LEVELS_INTERRUPT=0'",
+        "'-D TOUCH_SWAP_XY=false'",
+        "'-D TOUCH_SWAP_X=false'",
+        "'-D TOUCH_SWAP_Y=false'",
+        "'-D BOARD_HAS_TF'",
+        "'-D TF_CS=10'",
+        "'-D TF_SPI_MOSI=11'",
+        "'-D TF_SPI_SCLK=12'",
+        "'-D TF_SPI_MISO=13'",
+
+        "'-DCYD_SCREEN_HEIGHT_PX=272'",
+        "'-DCYD_SCREEN_WIDTH_PX=480'",
+        "-DROTATION_INVERTED=LV_DISP_ROT_180",
+        "-DROTATION_NORMAL=LV_DISP_ROT_NONE",
+        "'-DCYD_SCREEN_GAP_PX=10'",
+        "'-DCYD_SCREEN_MIN_BUTTON_HEIGHT_PX=35'",
+        "'-DCYD_SCREEN_MIN_BUTTON_WIDTH_PX=40'",
+        "'-DCYD_SCREEN_FONT=lv_font_montserrat_16'",
+        "'-DCYD_SCREEN_FONT_SMALL=lv_font_montserrat_12'",
+        "'-DCYD_SCREEN_SIDEBAR_SIZE_PX=50'",
+        "'-DCYD_SCREEN_DRIVER_ESP32_SMARTDISPLAY=1'"
+      ],
+      "f_cpu": "240000000L",
+      "f_flash": "80000000L",
+      "flash_mode": "qio",
+      "hwids": [
+        [
+          "0x303A",
+          "0x1001"
+        ]
+      ],
+      "mcu": "esp32s3",
+      "variant": "esp32s3"
+    },
+    "connectivity": [
+      "wifi"
+    ],
+    "debug": {
+      "openocd_target": "esp32s3.cfg"
+    },
+    "frameworks": [
+      "arduino",
+      "espidf"
+    ],
+    "name": "esp32-4827S043R-SD",
+    "upload": {
+      "flash_size": "16MB",
+      "maximum_ram_size": 327680,
+      "maximum_size": 16777216,
+      "use_1200bps_touch": true,
+      "wait_for_upload_port": true,
+      "require_upload_port": true,
+      "speed": 460800
+    },
+    "url": "https://www.aliexpress.com/item/1005004788147691.html",
+    "vendor": "Sunton"
+  }

CYD-Klipper/src/ui/panels/settings_panel.cpp

@@ -217,7 +217,12 @@ void settings_section_device(lv_obj_t* panel)
     lv_create_custom_menu_switch("Screen Color Fix", panel, dualusb_screen_fix_switch, global_config.display_mode, NULL, "ONLY for the 2.8\" dual USB model screen");
 #endif
 
+#if defined(CYD_SCREEN_DRIVER_ESP32_SMARTDISPLAY) && !defined(CYD_SCREEN_DISABLE_TOUCH_CALIBRATION)
+    // TODO: Rotating screen requires different calibration points. 
+#else
     lv_create_custom_menu_switch("Rotate Screen", panel, rotate_screen_switch, global_config.rotate_screen);
+#endif
+
     lv_create_custom_menu_switch("Auto Update", panel, auto_ota_update_switch, global_config.auto_ota_update);
     lv_create_custom_menu_label("Version", panel, REPO_VERSION "  ");
 

ci.py

@@ -7,13 +7,15 @@ CYD_PORTS = [
     "esp32-8048S043C-SD", 
     "esp32-2432S024C-SD", 
     "esp32-4827S043C-SD",
-    "esp32-3248S035C-V"
+    "esp32-3248S035C-V",
+    "esp32-4827S043R-SD",
 ]
 BASE_DIR = os.getcwd()
 
 def get_manifest(base_path : str, device_name : str):
     return {
         "name": f"to {device_name}",
+        "funding_url": "https://ko-fi.com/suchmememanyskill",
         "new_install_prompt_erase": True,
         "builds": [
             {