Merge branch 'master' of https://github.com/suchmememanyskill/CYD-Klipper-Display

update virtual printer
Fix #178
2026-03-21 21:53:24 +00:00 · 2025-09-30 00:19:48 +02:00 · 2025-09-30 00:19:41 +02:00 · 2025-08-19 00:51:29 +02:00 · 2025-08-18 23:29:01 +02:00 · 2025-08-10 14:14:53 +02:00
27 changed files with 1524 additions and 146 deletions
--- a/.github/workflows/compile.yaml
+++ b/.github/workflows/compile.yaml
@@ -20,7 +20,7 @@ jobs:
    runs-on: windows-latest

    steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
        with:
          fetch-depth: 0
          
@@ -31,9 +31,9 @@ jobs:
      #      ~/.platformio/.cache
      #    key: ${{ runner.os }}-pio-cyd-klipper

-      - uses: actions/setup-python@v4
+      - uses: actions/setup-python@v5
        with:
-          python-version: '3.9'
+          python-version: '3.13'

      - name: Install PlatformIO Core
        run: pip install --upgrade platformio esptool
@@ -43,13 +43,13 @@ jobs:
          python3 ci.py

      - name: Upload artifact 
-        uses: actions/upload-artifact@v3
+        uses: actions/upload-artifact@v4
        with:
          name: firmware
          path: ./out 

      - name: Upload GitHub Page Artifact
-        uses: actions/upload-pages-artifact@v2
+        uses: actions/upload-pages-artifact@v3

  deploy:
    environment:
@@ -65,5 +65,5 @@ jobs:

      - name: Deploy to GitHub Pages
        id: deployment
-        uses: actions/deploy-pages@v2
+        uses: actions/deploy-pages@v4
  
--- a/CYD-Klipper/.vscode/settings.json
+++ b/CYD-Klipper/.vscode/settings.json
@@ -48,7 +48,8 @@
        "stdexcept": "cpp",
        "streambuf": "cpp",
        "cinttypes": "cpp",
-        "typeinfo": "cpp"
+        "typeinfo": "cpp",
+        "*.tpp": "cpp"
    },
    "cmake.configureOnOpen": false
 }
--- a/CYD-Klipper/boards/esp32-2432S022C-vertical.json
+++ b/CYD-Klipper/boards/esp32-2432S022C-vertical.json
@@ -0,0 +1,127 @@
+{
+    "build": {
+      "arduino": {
+        "ldscript": "esp32_out.ld"
+      },
+      "core": "esp32",
+      "extra_flags": [
+        "'-D ARDUINO_ESP32_DEV'",
+        "'-D ESP32_2432S022C'",
+        "'-D LCD_WIDTH=240'",
+        "'-D LCD_HEIGHT=320'",
+        "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/8)'",
+        "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'",
+        "'-D GPIO_BCKL=0'",
+        "'-D LCD_ST7789_I80'",
+        "'-D ST7789_I80_BUS_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
+        "'-D ST7789_I80_BUS_CONFIG_DC=16'",
+        "'-D ST7789_I80_BUS_CONFIG_WR=4'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D8=15'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D9=13'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D10=12'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D11=14'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D12=27'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D13=25'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D14=33'",
+        "'-D ST7789_I80_BUS_CONFIG_DATA_GPIO_D15=32'",
+        "'-D ST7789_I80_BUS_CONFIG_BUS_WIDTH=8'",
+        "'-D ST7789_I80_BUS_CONFIG_MAX_TRANSFER_BYTES=(LVGL_BUFFER_PIXELS * sizeof(lv_color_t))'",
+        "'-D ST7789_I80_BUS_CONFIG_PSRAM_TRANS_ALIGN=64'",
+        "'-D ST7789_I80_BUS_CONFIG_SRAM_TRANS_ALIGN=4'",
+        "'-D ST7789_IO_I80_CONFIG_CS_GPIO_NUM=17'",
+        "'-D ST7789_IO_I80_CONFIG_PCLK_HZ=12000000'",
+        "'-D ST7789_IO_I80_CONFIG_TRANS_QUEUE_DEPTH=10'",
+        "'-D ST7789_IO_I80_CONFIG_LCD_CMD_BITS=8'",
+        "'-D ST7789_IO_I80_CONFIG_LCD_PARAM_BITS=8'",
+        "'-D ST7789_IO_I80_CONFIG_DC_LEVELS_DC_IDLE_LEVEL=0'",
+        "'-D ST7789_IO_I80_CONFIG_DC_LEVELS_DC_CMD_LEVEL=0'",
+        "'-D ST7789_IO_I80_CONFIG_DC_LEVELS_DC_DUMMY_LEVEL=0'",
+        "'-D ST7789_IO_I80_CONFIG_DC_LEVELS_DC_DATA_LEVEL=1'",
+        "'-D ST7789_IO_I80_CONFIG_FLAGS_CS_ACTIVE_HIGH=0'",
+        "'-D ST7789_IO_I80_CONFIG_FLAGS_REVERSE_COLOR_BITS=0'",
+        "'-D ST7789_IO_I80_CONFIG_FLAGS_SWAP_COLOR_BYTES=0'",
+        "'-D ST7789_IO_I80_CONFIG_FLAGS_PCLK_ACTIVE_NEG=0'",
+        "'-D ST7789_IO_I80_CONFIG_FLAGS_PCLK_IDLE_LOW=0'",
+        "'-D ST7789_DEV_CONFIG_RESET_GPIO_NUM=GPIO_NUM_NC'",
+        "'-D ST7789_DEV_CONFIG_COLOR_SPACE=ESP_LCD_COLOR_SPACE_RGB'",
+        "'-D ST7789_DEV_CONFIG_BITS_PER_PIXEL=16'",
+        "'-D ST7789_DEV_CONFIG_FLAGS_RESET_ACTIVE_HIGH=false'",
+        "'-D ST7789_DEV_CONFIG_VENDOR_CONFIG=NULL'",
+        "'-D ST7789_RD_GPIO=2'",
+        "'-D LCD_SWAP_XY=false'",
+        "'-D LCD_MIRROR_X=false'",
+        "'-D LCD_MIRROR_Y=false'",
+        "'-D BOARD_HAS_TOUCH'",
+        "'-D TOUCH_CST816S_I2C'",
+        "'-D CST816S_I2C_HOST=I2C_NUM_0'",
+        "'-D CST816S_I2C_CONFIG_SDA_IO_NUM=21'",
+        "'-D CST816S_I2C_CONFIG_SCL_IO_NUM=22'",
+        "'-D CST816S_I2C_CONFIG_SDA_PULLUP_EN=GPIO_PULLUP_ENABLE'",
+        "'-D CST816S_I2C_CONFIG_SCL_PULLUP_EN=GPIO_PULLUP_ENABLE'",
+        "'-D CST816S_I2C_CONFIG_MASTER_CLK_SPEED=400000'",
+        "'-D CST816S_I2C_CONFIG_CLK_FLAGS=0'",
+        "'-D CST816S_IO_I2C_CONFIG_DEV_ADDR=ESP_LCD_TOUCH_IO_I2C_CST816S_ADDRESS'",
+        "'-D CST816S_IO_I2C_CONFIG_CONTROL_PHASE_BYTES=1'",
+        "'-D CST816S_IO_I2C_CONFIG_DC_BIT_OFFSET=0'",
+        "'-D CST816S_IO_I2C_CONFIG_LCD_CMD_BITS=8'",
+        "'-D CST816S_IO_I2C_CONFIG_LCD_PARAM_BITS=0'",
+        "'-D CST816S_IO_I2C_CONFIG_FLAGS_DC_LOW_ON_DATA=false'",
+        "'-D CST816S_IO_I2C_CONFIG_FLAGS_DISABLE_CONTROL_PHASE=true'",
+        "'-D CST816S_TOUCH_CONFIG_X_MAX=LCD_WIDTH'",
+        "'-D CST816S_TOUCH_CONFIG_Y_MAX=LCD_HEIGHT'",
+        "'-D CST816S_TOUCH_CONFIG_RST_GPIO_NUM=GPIO_NUM_NC'",
+        "'-D CST816S_TOUCH_CONFIG_INT_GPIO_NUM=GPIO_NUM_NC'",
+        "'-D CST816S_TOUCH_CONFIG_LEVELS_RESET=0'",
+        "'-D CST816S_TOUCH_CONFIG_LEVELS_INTERRUPT=0'",
+        "'-D TOUCH_SWAP_XY=false'",
+        "'-D TOUCH_SWAP_X=false'",
+        "'-D TOUCH_SWAP_Y=false'",
+        "'-D BOARD_HAS_TF'",
+        "'-D TF_CS=5'",
+        "'-D TF_SPI_MOSI=23'",
+        "'-D TF_SPI_SCLK=18'",
+        "'-D TF_SPI_MISO=19'",
+        "'-D BOARD_HAS_SPEAK'",
+        "'-D SPEAK=26'",
+
+        "-DCYD_SCREEN_GAP_PX=8",
+        "-DCYD_SCREEN_MIN_BUTTON_HEIGHT_PX=35",
+        "-DCYD_SCREEN_MIN_BUTTON_WIDTH_PX=35",
+	"-DCYD_SCREEN_VERTICAL=1",
+        "-DCYD_SCREEN_FONT=lv_font_montserrat_14",
+        "-DCYD_SCREEN_FONT_SMALL=lv_font_montserrat_10",
+        "-DCYD_SCREEN_SIDEBAR_SIZE_PX=40",
+        "-DCYD_SCREEN_DRIVER_ESP32_SMARTDISPLAY=1",
+        "-DCYD_SCREEN_DISABLE_TOUCH_CALIBRATION=1",
+        "-DCYD_SCREEN_DISABLE_INVERT_COLORS=1"
+      ],
+      "f_cpu": "240000000L",
+      "f_flash": "40000000L",
+      "flash_mode": "dio",
+      "mcu": "esp32",
+      "variant": "esp32"
+    },
+    "connectivity": [
+      "wifi",
+      "bluetooth",
+      "ethernet",
+      "can"
+    ],
+    "debug": {
+      "openocd_board": "esp-wroom-32.cfg"
+    },
+    "frameworks": [
+      "arduino",
+      "espidf"
+    ],
+    "name": "esp32-2432S022C-V",
+    "upload": {
+      "flash_size": "4MB",
+      "maximum_ram_size": 327680,
+      "maximum_size": 4194304,
+      "require_upload_port": true,
+      "speed": 460800
+    },
+    "url": "https://www.aliexpress.com/item/1005006284154750.html",
+    "vendor": "Sunton"
+  }
--- a/CYD-Klipper/boards/esp32-CROWPANEL-35C.json
+++ b/CYD-Klipper/boards/esp32-CROWPANEL-35C.json
@@ -0,0 +1,55 @@
+{
+    "build": {
+      "arduino": {
+        "ldscript": "esp32s3_out.ld",
+        "partitions": "default_16MB.csv",
+        "memory_type": "qio_opi"
+      },
+      "core": "esp32",
+      "extra_flags": [
+        "-DCYD_SCREEN_HEIGHT_PX=320",
+        "-DCYD_SCREEN_WIDTH_PX=480",
+        "-DCYD_SCREEN_GAP_PX=10",
+        "-DCYD_SCREEN_MIN_BUTTON_HEIGHT_PX=45",
+        "-DCYD_SCREEN_MIN_BUTTON_WIDTH_PX=45",
+        "-DCYD_SCREEN_FONT=lv_font_montserrat_16",
+        "-DCYD_SCREEN_FONT_SMALL=lv_font_montserrat_12",
+        "-DCYD_SCREEN_SIDEBAR_SIZE_PX=50",
+        "-DCYD_SCREEN_DRIVER_ESP32_CROWPANEL_35C=1",
+        "-DCYD_SCREEN_DISABLE_TOUCH_CALIBRATION=1"
+      ],
+      "f_cpu": "240000000L",
+      "f_flash": "80000000L",
+      "flash_mode": "qio",
+      "hwids": [
+        [
+          "0x303A",
+          "0x1001"
+        ]
+      ],
+      "mcu": "esp32s3",
+      "variant": "esp32s3"
+    },
+    "connectivity": [
+      "wifi"
+    ],
+    "debug": {
+      "openocd_target": "esp32s3.cfg"
+    },
+    "frameworks": [
+      "arduino",
+      "espidf"
+    ],
+    "name": "esp32-8048S043C-SD",
+    "upload": {
+      "flash_size": "16MB",
+      "maximum_ram_size": 327680,
+      "maximum_size": 16777216,
+      "use_1200bps_touch": true,
+      "wait_for_upload_port": true,
+      "require_upload_port": true,
+      "speed": 460800
+    },
+    "url": "https://www.elecrow.com/esp-terminal-with-esp32-3-5-inch-parallel-480x320-tft-capacitive-touch-display-rgb-by-chip-ili9488.html",
+    "vendor": "CROWPANEL"
+  }
--- a/CYD-Klipper/boards/esp32-JC3248W535C.json
+++ b/CYD-Klipper/boards/esp32-JC3248W535C.json
@@ -0,0 +1,69 @@
+{
+    "name": "ESP32-JC3248W535C",
+    "url":  "https://www.aliexpress.com/item/1005007566315926.html",     
+    "vendor": "Guition",
+  
+    "build": {
+      "arduino": {
+        "ldscript": "esp32s3_out.ld",
+        "memory_type": "qio_opi",
+        "partitions": "default_16MB.csv"
+      },
+      "core":     "esp32",
+      "mcu":      "esp32s3",
+      "variant":  "esp32s3",
+  
+      "f_cpu":    "240000000L",  
+      "f_flash":  "80000000L",   
+      "extra_flags": [
+        "-DLCD_WIDTH=320",
+        "-DLCD_HEIGHT=480",
+        "-DCYD_SCREEN_GAP_PX=8",
+        "-DCYD_SCREEN_FONT=lv_font_montserrat_14",
+        "-DCYD_SCREEN_FONT_SMALL=lv_font_montserrat_12",
+        "-DCYD_SCREEN_WIDTH_PX=LCD_WIDTH",
+        "-DCYD_SCREEN_HEIGHT_PX=LCD_HEIGHT",
+        "-DCYD_SCREEN_SIDEBAR_SIZE_PX=50",
+        "-DCYD_SCREEN_MIN_BUTTON_HEIGHT_PX=45",
+        "-DCYD_SCREEN_MIN_BUTTON_WIDTH_PX=45",
+        "-DLCD_CS=45",
+        "-DLCD_CLK=47",
+        "-DLCD_D0=21",
+        "-DLCD_D1=48",
+        "-DLCD_D2=40",
+        "-DLCD_D3=39",
+        "-DLCD_RST=-1",           
+        "-DLCD_DC=8",            
+        "-DTOUCH_SDA=4",
+        "-DTOUCH_SCL=8",
+        "-DTOUCH_ADDR=0x3B",
+        "-DLCD_BL_PIN=1",
+        "-DCYD_BOARD_JC3248W535C",
+        "-DCYD_SCREEN_DISABLE_TOUCH_CALIBRATION",
+        "-DUSER_SETUP_LOADED",
+        "-DARDUINO_USB_CDC_ON_BOOT=1",
+        "-DCYD_SCREEN_VERTICAL=1"
+      ],
+      "flash_mode": "qio",
+
+      "hwids": [
+        [
+          "0X303A",
+          "0x1001"
+        ]
+      ]
+    },
+  
+    "upload": {
+      "flash_size": "16MB",
+      "flash_mode": "qio",
+      "maximum_ram_size": 327680,
+      "maximum_size": 16777216,
+      "require_upload_port": true,
+      "speed": 921600
+    },
+  
+    "frameworks":  ["arduino", "espidf"],
+    "connectivity": ["wifi", "bluetooth"]
+  }
+  
--- a/CYD-Klipper/boards/esp32-JC4827W543C.json
+++ b/CYD-Klipper/boards/esp32-JC4827W543C.json
@@ -0,0 +1,66 @@
+{
+    "name": "ESP32-JC4827W543C",
+    "url":  "https://s.click.aliexpress.com/e/_oEcVE26",     
+    "vendor": "Guition",
+  
+    "build": {
+      "arduino": {
+        "ldscript": "esp32s3_out.ld",
+        "memory_type": "qio_opi"
+      },
+      "core":     "esp32",
+      "mcu":      "esp32s3",
+      "variant":  "esp32s3",
+  
+      "f_cpu":    "240000000L",  
+      "f_flash":  "80000000L",   
+      "extra_flags": [
+        "-DBOARD_HAS_PSRAM",
+        "-DLCD_WIDTH=480",
+        "-DLCD_HEIGHT=270",
+        "-DCYD_SCREEN_GAP_PX=8",
+        "-DCYD_SCREEN_FONT=lv_font_montserrat_14",
+        "-DCYD_SCREEN_FONT_SMALL=lv_font_montserrat_12",
+        "-DCYD_SCREEN_WIDTH_PX=480",
+        "-DCYD_SCREEN_HEIGHT_PX=272",
+        "-DCYD_SCREEN_SIDEBAR_SIZE_PX=50",
+        "-DCYD_SCREEN_MIN_BUTTON_HEIGHT_PX=40",
+        "-DCYD_SCREEN_MIN_BUTTON_WIDTH_PX=45",
+        "-DLCD_CS=45",
+        "-DLCD_CLK=47",
+        "-DLCD_D0=21",
+        "-DLCD_D1=48",
+        "-DLCD_D2=40",
+        "-DLCD_D3=39",
+        "-DLCD_RST=-1",           
+        "-DLCD_DC=8",            
+        "-DLCD_BL_PIN=1",
+        "-DCYD_BOARD_JC4827W543C",
+        "-DCYD_SCREEN_DISABLE_TOUCH_CALIBRATION",
+        "-DUSER_SETUP_LOADED",
+        "-DARDUINO_USB_CDC_ON_BOOT=1",
+        "-DCYD_S3"
+      ],
+      "flash_mode": "qio",
+
+      "hwids": [
+        [
+          "0X303A",
+          "0x1001"
+        ]
+      ]
+    },
+  
+    "upload": {
+      "flash_size": "4MB",
+      "flash_mode": "qio",
+      "maximum_ram_size": 327680,
+      "maximum_size": 16777216,
+      "require_upload_port": true,
+      "speed": 921600
+    },
+  
+    "frameworks":  ["arduino", "espidf"],
+    "connectivity": ["wifi", "bluetooth"]
+  }
+  
--- a/CYD-Klipper/boards/esp32-JC8048W550.json
+++ b/CYD-Klipper/boards/esp32-JC8048W550.json
@@ -0,0 +1,142 @@
+{
+  "build": {
+    "arduino": {
+      "ldscript": "esp32s3_out.ld",
+      "partitions": "default_16MB.csv",
+      "memory_type": "qio_opi"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "'-D ARDUINO_ESP32S3_DEV'",
+      "'-D BOARD_HAS_PSRAM'",
+      "'-D ARDUINO_USB_MODE=1'",
+      "'-D ARDUINO_RUNNING_CORE=1'",
+      "'-D ARDUINO_EVENT_RUNNING_CORE=1'",
+      "'-D ARDUINO_USB_CDC_ON_BOOT=0'",
+      "'-D JC8048W550'",
+      "'-D LCD_WIDTH=800'",
+      "'-D LCD_HEIGHT=480'",
+      "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'",
+      "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'",
+      "'-D GPIO_BCKL=2'",
+      "'-D LCD_ST7262_PAR'",
+      "'-D ST7262_PANEL_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_PCLK_HZ=(14.2*1000000)'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_H_RES=LCD_WIDTH'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_V_RES=LCD_HEIGHT'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_HSYNC_PULSE_WIDTH=4'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_HSYNC_BACK_PORCH=8'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_HSYNC_FRONT_PORCH=8'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_VSYNC_PULSE_WIDTH=4'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_VSYNC_BACK_PORCH=8'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_VSYNC_FRONT_PORCH=8'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_HSYNC_IDLE_LOW=false'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_VSYNC_IDLE_LOW=false'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_DE_IDLE_HIGH=false'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_PCLK_ACTIVE_NEG=true'",
+      "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_PCLK_IDLE_HIGH=false'",
+      "'-D ST7262_PANEL_CONFIG_DATA_WIDTH=16'",
+      "'-D ST7262_PANEL_CONFIG_SRAM_TRANS_ALIGN=4'",
+      "'-D ST7262_PANEL_CONFIG_PSRAM_TRANS_ALIGN=64'",
+      "'-D ST7262_PANEL_CONFIG_HSYNC_GPIO_NUM=39'",
+      "'-D ST7262_PANEL_CONFIG_VSYNC_GPIO_NUM=41'",
+      "'-D ST7262_PANEL_CONFIG_DE_GPIO_NUM=40'",
+      "'-D ST7262_PANEL_CONFIG_PCLK_GPIO_NUM=42'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R0=8'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R1=3'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R2=46'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R3=9'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R4=1'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G0=5'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G1=6'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G2=7'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G3=15'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G4=16'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G5=4'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B0=45'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B1=48'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B2=47'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B3=21'",
+      "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B4=14'",
+      "'-D ST7262_PANEL_CONFIG_DISP_GPIO_NUM=GPIO_NUM_NC'",
+      "'-D ST7262_PANEL_CONFIG_FLAGS_DISP_ACTIVE_LOW=false'",
+      "'-D ST7262_PANEL_CONFIG_FLAGS_RELAX_ON_IDLE=false'",
+      "'-D ST7262_PANEL_CONFIG_FLAGS_FB_IN_PSRAM=true'",
+      "'-D BOARD_HAS_TOUCH'",
+      "'-D TOUCH_GT911_I2C'",
+      "'-D GT911_I2C_HOST=I2C_NUM_0'",
+      "'-D GT911_I2C_CONFIG_SDA_IO_NUM=19'",
+      "'-D GT911_I2C_CONFIG_SCL_IO_NUM=20'",
+      "'-D GT911_I2C_CONFIG_SDA_PULLUP_EN=GPIO_PULLUP_DISABLE'",
+      "'-D GT911_I2C_CONFIG_SCL_PULLUP_EN=GPIO_PULLUP_DISABLE'",
+      "'-D GT911_I2C_CONFIG_MASTER_CLK_SPEED=400000'",
+      "'-D GT911_I2C_CONFIG_CLK_FLAGS=I2C_SCLK_SRC_FLAG_FOR_NOMAL'",
+      "'-D GT911_IO_I2C_CONFIG_DEV_ADDR=ESP_LCD_TOUCH_IO_I2C_GT911_ADDRESS'",
+      "'-D GT911_IO_I2C_CONFIG_CONTROL_PHASE_BYTES=1'",
+      "'-D GT911_IO_I2C_CONFIG_DC_BIT_OFFSET=0'",
+      "'-D GT911_IO_I2C_CONFIG_LCD_CMD_BITS=16'",
+      "'-D GT911_IO_I2C_CONFIG_LCD_PARAM_BITS=0'",
+      "'-D GT911_IO_I2C_CONFIG_FLAGS_DC_LOW_ON_DATA=false'",
+      "'-D GT911_IO_I2C_CONFIG_FLAGS_DISABLE_CONTROL_PHASE=true'",
+      "'-D GT911_TOUCH_CONFIG_X_MAX=LCD_WIDTH'",
+      "'-D GT911_TOUCH_CONFIG_Y_MAX=LCD_HEIGHT'",
+      "'-D GT911_TOUCH_CONFIG_RST_GPIO_NUM=38'",
+      "'-D GT911_TOUCH_CONFIG_INT_GPIO_NUM=18'",
+      "'-D GT911_TOUCH_CONFIG_LEVELS_RESET=0'",
+      "'-D GT911_TOUCH_CONFIG_LEVELS_INTERRUPT=0'",
+      "'-D TOUCH_SWAP_XY=false'",
+      "'-D TOUCH_SWAP_X=false'",
+      "'-D TOUCH_SWAP_Y=false'",
+      "'-D BOARD_HAS_TF'",
+      "'-D TF_CS=10'",
+      "'-D TF_SPI_MOSI=11'",
+      "'-D TF_SPI_SCLK=12'",
+      "'-D TF_SPI_MISO=13'",
+      "-DCYD_SCREEN_HEIGHT_PX=LCD_HEIGHT",
+      "-DCYD_SCREEN_WIDTH_PX=LCD_WIDTH",
+      "-DROTATION_INVERTED=LV_DISP_ROT_180",
+      "-DROTATION_NORMAL=LV_DISP_ROT_NONE",
+      "-DCYD_SCREEN_GAP_PX=15",
+      "-DCYD_SCREEN_MIN_BUTTON_HEIGHT_PX=60",
+      "-DCYD_SCREEN_MIN_BUTTON_WIDTH_PX=60",
+      "-DCYD_SCREEN_FONT=lv_font_montserrat_22",
+      "-DCYD_SCREEN_FONT_SMALL=lv_font_montserrat_16",
+      "-DCYD_SCREEN_SIDEBAR_SIZE_PX=70",
+      "-DCYD_SCREEN_DRIVER_ESP32_SMARTDISPLAY=0",
+      "-DCYD_SCREEN_DISABLE_TOUCH_CALIBRATION=1"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "qio",
+    "hwids": [
+      [
+        "0x303A",
+        "0x1001"
+      ]
+    ],
+    "mcu": "esp32s3",
+    "variant": "esp32s3"
+  },
+  "connectivity": [
+    "wifi"
+  ],
+  "debug": {
+    "openocd_target": "esp32s3.cfg"
+  },
+  "frameworks": [
+    "arduino",
+    "espidf"
+  ],
+  "name": "esp32-JC8048W550",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "use_1200bps_touch": true,
+    "wait_for_upload_port": true,
+    "require_upload_port": true,
+    "speed": 460800
+  },
+  "url": "https://www.aliexpress.com/item/1005006715581887.html",
+  "vendor": "Guition"
+}
--- a/CYD-Klipper/platformio.ini
+++ b/CYD-Klipper/platformio.ini
@@ -14,21 +14,21 @@ board = esp32dev
 framework = arduino
 monitor_speed = 115200
 debug_build_flags = -Os
-lib_deps = 
+lib_deps =
 	https://github.com/suchmememanyskill/esp32-smartdisplay#9c1d737
 	bblanchon/ArduinoJson@^7.0.0
 	plageoj/UrlEncode@^1.0.1
 	knolleary/PubSubClient@^2.8
 	WiFiClientSecure
 monitor_filters = esp32_exception_decoder
-build_flags = 
+build_flags =
 	-DLV_CONF_PATH="../../../../src/conf/lv_conf.h"
-extra_scripts = 
+extra_scripts =
 	pre:extract_commit.py

 [env:esp32-2432S028R]
 board = esp32-2432S028R
-lib_deps = 
+lib_deps =
 	SPI
 	https://github.com/suchmememanyskill/lvgl
 	https://github.com/Bodmer/TFT_eSPI.git
@@ -40,7 +40,7 @@ lib_deps =

 [env:esp32-3248S035C]
 board = esp32-3248S035C
-lib_deps = 
+lib_deps =
 	SPI
 	https://github.com/suchmememanyskill/lvgl
 	https://github.com/Bodmer/TFT_eSPI.git
@@ -52,7 +52,7 @@ lib_deps =

 [env:esp32-3248S035C-V]
 board = esp32-3248S035C-vertical
-lib_deps = 
+lib_deps =
 	SPI
 	https://github.com/suchmememanyskill/lvgl
 	https://github.com/Bodmer/TFT_eSPI.git
@@ -84,7 +84,7 @@ board = esp32-3248S035C-smartdisplay
 board = esp32-4827S043C-smartdisplay

 [env:esp32-4827S043R-SD]
-board = esp32-4827S043C-smartdisplay
+board = esp32-4827S043R-smartdisplay

 [env:esp32-8048S043C-SD]
 board = esp32-8048S043C-smartdisplay
@@ -92,9 +92,12 @@ board = esp32-8048S043C-smartdisplay
 [env:esp32-8048S043C-SD-alt]
 board = esp32-8048S043C-smartdisplay-alt

+[env:esp32-2432S022C-SD-V]
+board = esp32-2432S022C-vertical
+
 [env:esp32-CROWPANEL-28R]
 board = esp32-CROWPANEL-28R
-lib_deps = 
+lib_deps =
 	SPI
 	https://github.com/suchmememanyskill/lvgl
 	https://github.com/Bodmer/TFT_eSPI.git
@@ -102,3 +105,40 @@ lib_deps =
 	plageoj/UrlEncode@^1.0.1
 	knolleary/PubSubClient@^2.8
 	WiFiClientSecure
+
+[env:esp32-CROWPANEL-35C]
+board = esp32-CROWPANEL-35C
+lib_deps =
+	SPI
+	https://github.com/suchmememanyskill/lvgl
+	https://github.com/lovyan03/LovyanGFX@1.2.7
+	bblanchon/ArduinoJson@^7.0.0
+	plageoj/UrlEncode@^1.0.1
+	knolleary/PubSubClient@^2.8
+	WiFiClientSecure
+
+[env:esp32-JC8048W550]
+board = esp32-JC8048W550
+
+[env:ESP32-JC3248W535C]
+board = esp32-JC3248W535C
+lib_deps =
+    SPI
+    moononournation/GFX Library for Arduino
+    lvgl/lvgl@^8.4.0
+    plageoj/UrlEncode
+    bblanchon/ArduinoJson@^7.0.0
+	knolleary/PubSubClient@^2.8
+    WiFiClientSecure
+
+[env:esp32-JC4827W543C]
+board = esp32-JC4827W543C
+lib_deps =
+    SPI
+    https://github.com/moononournation/Arduino_GFX#v1.4.9
+	https://github.com/mmMicky/TouchLib#ccaedcd9155ef8a6560ae9f594ea92e32c68020f
+    lvgl/lvgl@^8.4.0
+    plageoj/UrlEncode
+    bblanchon/ArduinoJson@^7.0.0
+	knolleary/PubSubClient@^2.8
+    WiFiClientSecure
--- a/CYD-Klipper/src/core/bambu/bambu_printer_integration.hpp
+++ b/CYD-Klipper/src/core/bambu/bambu_printer_integration.hpp
@@ -2,7 +2,7 @@

 #include "../printer_integration.hpp"
 #include <ArduinoJson.h>
-#include <WifiClientSecure.h>
+#include <WiFiClientSecure.h>

 enum BambuSpeedProfile 
 {
--- a/CYD-Klipper/src/core/bambu/bambu_printer_panels.cpp
+++ b/CYD-Klipper/src/core/bambu/bambu_printer_panels.cpp
@@ -161,7 +161,7 @@ struct
    };
 } __internal_bambu_file_state = {};

-#define SET_BOOL_STATE(bool_name, func_name) static void func_name (lv_event_t * e) { auto state = lv_obj_get_state(lv_event_get_target(e)); bool_name = (state & LV_STATE_CHECKED == LV_STATE_CHECKED); }
+#define SET_BOOL_STATE(bool_name, func_name) static void func_name (lv_event_t * e) { bool_name = lv_obj_has_state(lv_event_get_target(e), LV_STATE_CHECKED); }

 SET_BOOL_STATE(__internal_bambu_file_state.bambu_option_use_ams, set_bambu_option_use_ams)
 SET_BOOL_STATE(__internal_bambu_file_state.bambu_option_timelapse, set_bambu_option_timelapse)
--- a/CYD-Klipper/src/core/device/ESP32-CROWPANEL-35C.cpp
+++ b/CYD-Klipper/src/core/device/ESP32-CROWPANEL-35C.cpp
@@ -0,0 +1,183 @@
+// Adapted from https://github.com/OzInFl/Elecrow-3.5-RGB-TFT-SQUARELINE-EXAMPLE
+
+#ifdef CYD_SCREEN_DRIVER_ESP32_CROWPANEL_35C
+#include "../screen_driver.h"
+#include "lvgl.h"
+#include "../../conf/global_config.h"
+#include <LovyanGFX.hpp>
+#include <Arduino.h>
+#include <Wire.h>
+
+#ifdef CYD_SCREEN_VERTICAL
+#error "Vertical screen not supported with the ESP32_CROWPANEL_28R driver"
+#endif
+
+static lv_disp_draw_buf_t draw_buf;
+static lv_color_t buf[CYD_SCREEN_HEIGHT_PX * CYD_SCREEN_WIDTH_PX / 10];
+
+#define BUZZER_PIN 20
+#define LCD_BL 46
+#define SDA_FT6236 38
+#define SCL_FT6236 39
+#define I2C_TOUCH_ADDR 0x38
+
+class LGFX : public lgfx::LGFX_Device
+{
+    lgfx::Panel_ILI9488 _panel_instance;
+    lgfx::Bus_Parallel16 _bus_instance;
+    lgfx::Touch_FT5x06 _touch_instance;
+
+public:
+    LGFX()
+    {
+        auto bus_cfg = _bus_instance.config();
+        bus_cfg.port = 0;
+        bus_cfg.freq_write = 80000000;
+        bus_cfg.pin_wr = 18;
+        bus_cfg.pin_rd = 48;
+        bus_cfg.pin_rs = 45;
+        bus_cfg.pin_d0 = 47;
+        bus_cfg.pin_d1 = 21;
+        bus_cfg.pin_d2 = 14;
+        bus_cfg.pin_d3 = 13;
+        bus_cfg.pin_d4 = 12;
+        bus_cfg.pin_d5 = 11;
+        bus_cfg.pin_d6 = 10;
+        bus_cfg.pin_d7 = 9;
+        bus_cfg.pin_d8 = 3;
+        bus_cfg.pin_d9 = 8;
+        bus_cfg.pin_d10 = 16;
+        bus_cfg.pin_d11 = 15;
+        bus_cfg.pin_d12 = 7;
+        bus_cfg.pin_d13 = 6;
+        bus_cfg.pin_d14 = 5;
+        bus_cfg.pin_d15 = 4;
+        _bus_instance.config(bus_cfg);
+        _panel_instance.setBus(&_bus_instance);
+
+        auto panel_cfg = _panel_instance.config();
+        panel_cfg.pin_cs = -1;
+        panel_cfg.pin_rst = -1;
+        panel_cfg.pin_busy = -1;
+        panel_cfg.memory_width = 320;
+        panel_cfg.memory_height = 480;
+        panel_cfg.panel_width = 320;
+        panel_cfg.panel_height = 480;
+        panel_cfg.offset_x = 0;
+        panel_cfg.offset_y = 0;
+        panel_cfg.offset_rotation = 0;
+        panel_cfg.dummy_read_pixel = 8;
+        panel_cfg.dummy_read_bits = 1;
+        panel_cfg.readable = true;
+        panel_cfg.invert = global_config.printer_config[global_config.printer_index].invert_colors ? true : false;
+        panel_cfg.rgb_order = false;
+        panel_cfg.dlen_16bit = true;
+        panel_cfg.bus_shared = true;
+
+        _panel_instance.config(panel_cfg);
+
+        auto touch_cfg = _touch_instance.config();
+        touch_cfg.x_min = 0;
+        touch_cfg.x_max = 319;
+        touch_cfg.y_min = 0;
+        touch_cfg.y_max = 479;
+        touch_cfg.pin_int = -1;
+        touch_cfg.bus_shared = false;
+        touch_cfg.offset_rotation = 0;
+
+        touch_cfg.i2c_port = 1;
+        touch_cfg.i2c_addr = 0x38;
+        touch_cfg.pin_sda = 38;
+        touch_cfg.pin_scl = 39;
+        touch_cfg.freq = 400000;
+
+        _touch_instance.config(touch_cfg);
+        _panel_instance.setTouch(&_touch_instance);
+
+        setPanel(&_panel_instance);
+    }
+};
+
+LGFX tft;
+
+void screen_setBrightness(unsigned char brightness)
+{
+    // TODO
+}
+
+void set_invert_display()
+{
+    // TODO
+}
+
+void screen_lv_flush(lv_disp_drv_t *disp, const lv_area_t *area, lv_color_t *color_p)
+{
+    uint32_t w = (area->x2 - area->x1 + 1);
+    uint32_t h = (area->y2 - area->y1 + 1);
+
+    tft.startWrite();
+    tft.setAddrWindow(area->x1, area->y1, w, h);
+    tft.writePixels((lgfx::rgb565_t *)&color_p->full, w * h);
+    tft.endWrite();
+
+    lv_disp_flush_ready(disp);
+}
+
+void screen_lv_touchRead(lv_indev_drv_t *indev_driver, lv_indev_data_t *data)
+{
+    uint16_t touchX, touchY;
+
+    bool touched = tft.getTouch(&touchX, &touchY);
+
+    if (touchX > CYD_SCREEN_WIDTH_PX || touchY > CYD_SCREEN_HEIGHT_PX)
+    {
+        LOG_LN("Y or y outside of expected parameters..");
+    }
+    else
+    {
+        data->state = touched ? LV_INDEV_STATE_PR : LV_INDEV_STATE_REL;
+        data->point.x = touchX;
+        data->point.y = touchY;
+    }
+}
+
+void screen_setup()
+{
+    pinMode(BUZZER_PIN, OUTPUT);
+    ledcSetup(4, 5000, 8);
+    ledcAttachPin(BUZZER_PIN, 4);
+
+    tft.begin();
+    tft.setRotation(global_config.rotate_screen ? 3 : 1);
+
+    delay(500);
+
+    pinMode(LCD_BL, OUTPUT);
+    digitalWrite(LCD_BL, HIGH);
+
+/*
+    ledcSetup(0, 5000, 12);
+    ledcAttachPin(LCD_BL, 0);
+*/
+
+    lv_init();
+    lv_disp_draw_buf_init(&draw_buf, buf, NULL, CYD_SCREEN_WIDTH_PX * CYD_SCREEN_HEIGHT_PX / 10);
+
+    /*Initialize the display*/
+    static lv_disp_drv_t disp_drv;
+    lv_disp_drv_init(&disp_drv);
+    disp_drv.hor_res = CYD_SCREEN_WIDTH_PX;
+    disp_drv.ver_res = CYD_SCREEN_HEIGHT_PX;
+    disp_drv.flush_cb = screen_lv_flush;
+    disp_drv.draw_buf = &draw_buf;
+    lv_disp_drv_register(&disp_drv);
+
+    /*Initialize the (dummy) input device driver*/
+    static lv_indev_drv_t indev_drv;
+    lv_indev_drv_init(&indev_drv);
+    indev_drv.type = LV_INDEV_TYPE_POINTER;
+    indev_drv.read_cb = screen_lv_touchRead;
+    lv_indev_drv_register(&indev_drv);
+}
+
+#endif
--- a/CYD-Klipper/src/core/device/ESP32-JC3248W535C.cpp
+++ b/CYD-Klipper/src/core/device/ESP32-JC3248W535C.cpp
@@ -0,0 +1,184 @@
+#ifdef CYD_BOARD_JC3248W535C
+
+#include "../screen_driver.h"
+#include <databus/Arduino_ESP32QSPI.h>
+#include <display/Arduino_AXS15231B.h>
+#include <canvas/Arduino_Canvas.h>
+#include "lvgl.h"
+#include "../lv_setup.h"
+#include "../../conf/global_config.h"
+#include <Wire.h>
+#define CPU_FREQ_HIGH 240
+#define CPU_FREQ_LOW 80
+
+struct TouchPoint {
+  uint8_t gesture;
+  uint8_t num;
+  uint8_t x_h : 4;
+  uint8_t _pad1 : 2;
+  uint8_t event : 2;
+  uint8_t x_l;
+  uint8_t y_h : 4;
+  uint8_t _pad2 : 4;
+  uint8_t y_l;
+} __attribute__((packed));
+
+static Arduino_ESP32QSPI qspiBus(
+    LCD_CS, LCD_CLK,
+    LCD_D0, LCD_D1,
+    LCD_D2, LCD_D3,
+    false);
+
+
+Arduino_GFX *gfx = new Arduino_AXS15231B(
+    &qspiBus, -1, 2, true,
+    LCD_WIDTH, LCD_HEIGHT,
+    0, 0, 0, 0);
+
+#ifdef CYD_SCREEN_VERTICAL
+    static bool horizontal = false;
+    static Arduino_Canvas canvas(CYD_SCREEN_WIDTH_PX, CYD_SCREEN_HEIGHT_PX, gfx, 0, 0);
+#else
+    static bool horizontal = true;
+    static Arduino_Canvas canvas(CYD_SCREEN_HEIGHT_PX, CYD_SCREEN_WIDTH_PX, gfx, 0, 0);
+
+#endif
+
+static lv_disp_draw_buf_t draw_buf;
+static lv_color_t *buf = nullptr;
+static lv_disp_t *main_disp = nullptr;
+
+
+void screen_setBrightness(uint8_t brightness)
+{
+    uint32_t duty = (4095UL * brightness) / 255UL;
+    ledcWrite(0, duty);
+}
+
+void screen_lv_flush(lv_disp_drv_t *disp, const lv_area_t *area, lv_color_t *color_p)
+{
+    int x = area->x1;
+    int y = area->y1;
+    int w = area->x2 - area->x1 + 1;
+    int h = area->y2 - area->y1 + 1;
+    canvas.draw16bitRGBBitmap(x, y, (uint16_t *)color_p, w, h);
+    canvas.flush();
+
+    lv_disp_flush_ready(disp);
+}
+
+// Reads 1 touch point from AXS15231B controller at I2C addr 0x3B
+bool read_touch(uint16_t &x, uint16_t &y) {
+  const uint8_t addr = 0x3B;
+
+  const uint8_t read_cmd[11] = {
+    0xB5, 0xAB, 0xA5, 0x5A, 0x00, 0x00,
+    0x00, 8, // length of expected reply (MSB, LSB)
+    0x00, 0x00, 0x00
+  };
+
+  Wire.beginTransmission(addr);
+  Wire.write(read_cmd, sizeof(read_cmd));
+  if (Wire.endTransmission(false) != 0) {
+    return false;
+  }
+
+  uint8_t data[8] = {0};
+  if (Wire.requestFrom(addr, (uint8_t)sizeof(data)) != sizeof(data)) {
+    return false;
+  }
+
+  for (uint8_t i = 0; i < sizeof(data); i++) {
+    data[i] = Wire.read();
+  }
+
+  TouchPoint *p = (TouchPoint *)data;
+
+  if (p->num > 0 && p->num <= 2) {
+    x = ((p->x_h & 0x0F) << 8) | p->x_l;
+    y = ((p->y_h & 0x0F) << 8) | p->y_l;
+
+    // Clamp to screen bounds
+    if (x >= CYD_SCREEN_WIDTH_PX) x = CYD_SCREEN_WIDTH_PX - 1;
+    if (y >= CYD_SCREEN_HEIGHT_PX) y = CYD_SCREEN_HEIGHT_PX - 1;
+    return true;
+  }
+
+  return false;
+}
+
+
+void screen_lv_touchRead(lv_indev_drv_t * /*indev_driver*/, lv_indev_data_t *data)
+{
+  uint16_t x, y;
+  if (read_touch(x, y)) {
+    x = min(x, uint16_t(CYD_SCREEN_WIDTH_PX - 1));
+    y = min(y, uint16_t(CYD_SCREEN_HEIGHT_PX - 1));
+    // Adjust coordinates based on screen rotation
+    if (global_config.rotate_screen) {
+      // Assuming rotation = 2 (180 degrees)
+      x = CYD_SCREEN_WIDTH_PX - x;
+      y = CYD_SCREEN_HEIGHT_PX - y;
+    }
+
+    data->state = LV_INDEV_STATE_PR;
+    data->point.x = x;
+    data->point.y = y;
+  } else {
+    data->state = LV_INDEV_STATE_REL;
+  }
+}
+
+void set_invert_display()
+{
+    gfx->invertDisplay(global_config.printer_config[global_config.printer_index].invert_colors);
+}
+
+void screen_setup()
+{
+    pinMode(LCD_BL_PIN, OUTPUT);
+    ledcSetup(0, 5000, 12);
+    ledcAttachPin(LCD_BL_PIN, 0);
+    screen_setBrightness(255);
+
+    // gfx->begin();
+    canvas.begin();
+    gfx->invertDisplay(true);  // OK after begin()
+    gfx->setRotation(global_config.rotate_screen ? 2 : 0);
+    canvas.fillScreen(0x0000);
+    canvas.flush();
+
+    Wire.begin(TOUCH_SDA, TOUCH_SCL);
+
+    lv_init();
+
+    // Allocate full canvas buffer for LVGL
+    buf = (lv_color_t *)heap_caps_malloc(
+        CYD_SCREEN_WIDTH_PX * CYD_SCREEN_HEIGHT_PX * sizeof(lv_color_t),
+        MALLOC_CAP_SPIRAM | MALLOC_CAP_8BIT);
+
+    assert(buf);
+
+    lv_disp_draw_buf_init(&draw_buf, buf, NULL, CYD_SCREEN_WIDTH_PX * CYD_SCREEN_HEIGHT_PX);
+
+    static lv_disp_drv_t disp_drv;
+    lv_disp_drv_init(&disp_drv);
+    disp_drv.flush_cb = screen_lv_flush;
+    disp_drv.draw_buf = &draw_buf;
+    
+    disp_drv.hor_res = CYD_SCREEN_WIDTH_PX;
+    disp_drv.ver_res = CYD_SCREEN_HEIGHT_PX;
+    if(horizontal){
+        main_disp = lv_disp_drv_register(&disp_drv);
+        lv_disp_set_rotation(main_disp, LV_DISP_ROT_90);
+    } else {
+        lv_disp_drv_register(&disp_drv);
+    }
+    static lv_indev_drv_t indev_drv;
+    lv_indev_drv_init(&indev_drv);
+    indev_drv.type = LV_INDEV_TYPE_POINTER;
+    indev_drv.read_cb = screen_lv_touchRead;
+    lv_indev_drv_register(&indev_drv);
+}   
+
+#endif // CYD_BOARD_JC3248W535C
--- a/CYD-Klipper/src/core/device/ESP32-JC4827W543C.cpp
+++ b/CYD-Klipper/src/core/device/ESP32-JC4827W543C.cpp
@@ -0,0 +1,85 @@
+#ifdef CYD_BOARD_JC4827W543C
+
+#include "../screen_driver.h"
+#include <Arduino_GFX_Library.h>
+#include "lvgl.h"
+#include "../lv_setup.h"
+#include "../../conf/global_config.h"
+#include "ESP32-JC4827W543C_touch.h"
+#define CPU_FREQ_HIGH 240
+#define CPU_FREQ_LOW 80
+
+Arduino_DataBus *bus = new Arduino_ESP32QSPI(LCD_CS, LCD_CLK, LCD_D0, LCD_D1, LCD_D2, LCD_D3);
+Arduino_NV3041A *panel = new Arduino_NV3041A(bus, LCD_RST, 0, true);
+
+static lv_disp_draw_buf_t draw_buf;
+static lv_disp_drv_t disp_drv;
+static lv_color_t disp_draw_buf[LCD_WIDTH * 48];
+
+void screen_setBrightness(uint8_t brightness)
+{
+    uint32_t duty = 4095 * brightness / 255;
+    ledcWrite(0, duty);
+}
+
+void screen_lv_flush(lv_disp_drv_t *disp, const lv_area_t *area, lv_color_t *color_p)
+{
+    uint32_t w = (area->x2 - area->x1 + 1);
+    uint32_t h = (area->y2 - area->y1 + 1);
+
+    panel->startWrite();
+    panel->setAddrWindow(area->x1, area->y1, w, h);
+    panel->writePixels((uint16_t *)&color_p->full, w * h);
+    panel->endWrite();
+    
+    lv_disp_flush_ready(disp);
+}
+
+void IRAM_ATTR screen_lv_touchRead(lv_indev_drv_t *indev_driver, lv_indev_data_t *data)
+{
+    if (touch_has_signal() && touch_touched())
+    {
+        data->state = LV_INDEV_STATE_PR;
+        data->point.x = touch_last_x;
+        data->point.y = touch_last_y;
+    }
+    else
+    {
+        data->state = LV_INDEV_STATE_REL;
+    }
+}
+
+void set_invert_display()
+{
+    panel->invertDisplay(global_config.printer_config[global_config.printer_index].invert_colors);
+}
+
+void screen_setup()
+{
+    pinMode(LCD_BL_PIN, OUTPUT);
+    ledcSetup(0, 5000, 12);
+    ledcAttachPin(LCD_BL_PIN, 0);
+    screen_setBrightness(128);
+
+    panel->begin();
+    panel->setRotation(global_config.rotate_screen ? 2 : 0);
+
+    touch_init(panel->width(), panel->height(), panel->getRotation());
+    lv_init();
+
+    lv_disp_draw_buf_init(&draw_buf, disp_draw_buf, NULL, LCD_WIDTH * 48);
+    lv_disp_drv_init(&disp_drv);
+    disp_drv.flush_cb = screen_lv_flush;
+    disp_drv.draw_buf = &draw_buf;
+    disp_drv.hor_res = CYD_SCREEN_WIDTH_PX;
+    disp_drv.ver_res = CYD_SCREEN_HEIGHT_PX;
+    lv_disp_drv_register(&disp_drv);
+
+    static lv_indev_drv_t indev_drv;
+    lv_indev_drv_init(&indev_drv);
+    indev_drv.type = LV_INDEV_TYPE_POINTER;
+    indev_drv.read_cb = screen_lv_touchRead;
+    lv_indev_drv_register(&indev_drv);
+}
+
+#endif // CYD_BOARD_JC4827W543C
--- a/CYD-Klipper/src/core/device/ESP32-JC4827W543C_touch.h
+++ b/CYD-Klipper/src/core/device/ESP32-JC4827W543C_touch.h
@@ -0,0 +1,196 @@
+/*******************************************************************************
+ *
+ *  TouchLib     https://github.com/mmMicky/TouchLib
+ Add Library from ZIP: TouchLib-main.zip
+ *
+ * Touch libraries:
+ * XPT2046: https://github.com/PaulStoffregen/XPT2046_Touchscreen.git
+ *
+ * Capacitive touchscreen libraries
+ * TouchLib: https://github.com/mmMicky/TouchLib.git
+ ******************************************************************************/
+
+/* uncomment for XPT2046 */
+// #define TOUCH_XPT2046
+// #define TOUCH_XPT2046_SCK 12
+// #define TOUCH_XPT2046_MISO 13
+// #define TOUCH_XPT2046_MOSI 11
+// #define TOUCH_XPT2046_CS 38
+// #define TOUCH_XPT2046_INT 3
+// #define TOUCH_XPT2046_ROTATION 0
+// #define TOUCH_XPT2046_SAMPLES 50
+
+ //uncomment for most capacitive touchscreen
+ #define TOUCH_MODULES_GT911 // GT911 / CST_SELF / CST_MUTUAL / ZTW622 / L58 / FT3267 / FT5x06
+ #define TOUCH_MODULE_ADDR GT911_SLAVE_ADDRESS1 // CTS328_SLAVE_ADDRESS / L58_SLAVE_ADDRESS / CTS826_SLAVE_ADDRESS / CTS820_SLAVE_ADDRESS / CTS816S_SLAVE_ADDRESS / FT3267_SLAVE_ADDRESS / FT5x06_ADDR / GT911_SLAVE_ADDRESS1 / GT911_SLAVE_ADDRESS2 / ZTW622_SLAVE1_ADDRESS / ZTW622_SLAVE2_ADDRESS
+ #define TOUCH_SCL 4
+ #define TOUCH_SDA 8
+ #define TOUCH_RES 38
+ #define TOUCH_INT 3
+
+// Please fill below values from Arduino_GFX Example - TouchCalibration
+bool touch_swap_xy = false;
+int16_t touch_map_x1 = -1;
+int16_t touch_map_x2 = -1;
+int16_t touch_map_y1 = -1;
+int16_t touch_map_y2 = -1;
+
+int16_t touch_max_x = 0, touch_max_y = 0;
+int16_t touch_raw_x = 0, touch_raw_y = 0;
+int16_t touch_last_x = 0, touch_last_y = 0;
+
+#if defined(TOUCH_XPT2046)
+#include <XPT2046_Touchscreen.h>
+#include <SPI.h>
+XPT2046_Touchscreen ts(TOUCH_XPT2046_CS, TOUCH_XPT2046_INT);
+
+#elif defined(TOUCH_MODULE_ADDR) // TouchLib
+#include <Wire.h>
+#include <TouchLib.h>
+TouchLib touch(Wire, TOUCH_SDA, TOUCH_SCL, TOUCH_MODULE_ADDR);
+
+#endif // TouchLib
+
+void touch_init(int16_t w, int16_t h, uint8_t r)
+{
+  touch_max_x = w - 1;
+  touch_max_y = h - 1;
+  if (touch_map_x1 == -1)
+  {
+    switch (r)
+    {
+    case 3:
+      touch_swap_xy = true;
+      touch_map_x1 = touch_max_x;
+      touch_map_x2 = 0;
+      touch_map_y1 = 0;
+      touch_map_y2 = touch_max_y;
+      break;
+    case 2:
+      touch_swap_xy = false;
+      touch_map_x1 = touch_max_x;
+      touch_map_x2 = 0;
+      touch_map_y1 = touch_max_y;
+      touch_map_y2 = 0;
+      break;
+    case 1:
+      touch_swap_xy = true;
+      touch_map_x1 = 0;
+      touch_map_x2 = touch_max_x;
+      touch_map_y1 = touch_max_y;
+      touch_map_y2 = 0;
+      break;
+    default: // case 0:
+      touch_swap_xy = false;
+      touch_map_x1 = 0;
+      touch_map_x2 = touch_max_x;
+      touch_map_y1 = 0;
+      touch_map_y2 = touch_max_y;
+      break;
+    }
+  }
+
+#if defined(TOUCH_XPT2046)
+  SPI.begin(TOUCH_XPT2046_SCK, TOUCH_XPT2046_MISO, TOUCH_XPT2046_MOSI, TOUCH_XPT2046_CS);
+  ts.begin();
+  ts.setRotation(TOUCH_XPT2046_ROTATION);
+
+#elif defined(TOUCH_MODULE_ADDR) // TouchLib
+  // Reset touchscreen
+#if (TOUCH_RES > 0)
+  pinMode(TOUCH_RES, OUTPUT);
+  digitalWrite(TOUCH_RES, 0);
+  delay(200);
+  digitalWrite(TOUCH_RES, 1);
+  delay(200);
+#endif
+  Wire.begin(TOUCH_SDA, TOUCH_SCL);
+  touch.init();
+
+#endif // TouchLib
+}
+
+bool touch_has_signal()
+{
+#if defined(TOUCH_XPT2046)
+  return ts.tirqTouched();
+
+#elif defined(TOUCH_MODULE_ADDR) // TouchLib
+  // TODO: implement TOUCH_INT
+  return true;
+#endif                           // TouchLib
+
+  return false;
+}
+
+void translate_touch_raw()
+{
+  if (touch_swap_xy)
+  {
+    touch_last_x = map(touch_raw_y, touch_map_x1, touch_map_x2, 0, touch_max_x);
+    touch_last_y = map(touch_raw_x, touch_map_y1, touch_map_y2, 0, touch_max_y);
+  }
+  else
+  {
+    touch_last_x = map(touch_raw_x, touch_map_x1, touch_map_x2, 0, touch_max_x);
+    touch_last_y = map(touch_raw_y, touch_map_y1, touch_map_y2, 0, touch_max_y);
+  }
+  // Serial.printf("touch_raw_x: %d, touch_raw_y: %d, touch_last_x: %d, touch_last_y: %d\n", touch_raw_x, touch_raw_y, touch_last_x, touch_last_y);
+}
+
+bool touch_touched()
+{
+#if defined(TOUCH_XPT2046)
+  if (ts.touched())
+  {
+    TS_Point p = ts.getPoint();
+    touch_raw_x = p.x;
+    touch_raw_y = p.y;
+    int max_z = p.z;
+    int count = 0;
+    while ((ts.touched()) && (count < TOUCH_XPT2046_SAMPLES))
+    {
+      count++;
+
+      TS_Point p = ts.getPoint();
+      if (p.z > max_z)
+      {
+        touch_raw_x = p.x;
+        touch_raw_y = p.y;
+        max_z = p.z;
+      }
+      // Serial.printf("touch_raw_x: %d, touch_raw_y: %d, p.z: %d\n", touch_raw_x, touch_raw_y, p.z);
+    }
+    translate_touch_raw();
+    return true;
+  }
+#elif defined(TOUCH_MODULE_ADDR) // TouchLib
+  if (touch.read())
+  {
+    TP_Point t = touch.getPoint(0);
+    touch_raw_x = t.x;
+    touch_raw_y = t.y;
+
+    touch_last_x = touch_raw_x;
+    touch_last_y = touch_raw_y;
+
+    translate_touch_raw();
+    return true;
+  }
+
+#endif // TouchLib
+
+  return false;
+}
+
+bool touch_released()
+{
+#if defined(TOUCH_XPT2046)
+  return true;
+
+#elif defined(TOUCH_MODULE_ADDR) // TouchLib
+  return false;
+#endif                           // TouchLib
+
+  return false;
+}
--- a/CYD-Klipper/src/core/klipper-serial/serial_klipper_printer_integration.cpp
+++ b/CYD-Klipper/src/core/klipper-serial/serial_klipper_printer_integration.cpp
@@ -271,9 +271,15 @@ int SerialKlipperPrinter::get_power_devices_count()
 bool SerialKlipperPrinter::set_power_device_state(const char* device_name, bool state)
 {
    String request = "/machine/device_power/device?device=" + urlEncode(device_name) + "&action=" + (state ? "on" : "off");
-    return make_serial_request_nocontent(HttpGet, request.c_str());
+    return make_serial_request_nocontent(HttpPost, request.c_str());
 }

+#ifdef CYD_S3
+#define MAX_FILE_LIST_SIZE 200
+#else
+#define MAX_FILE_LIST_SIZE 20
+#endif
+
 Files SerialKlipperPrinter::get_files()
 {
    Files files_result = {0};
@@ -291,7 +297,7 @@ Files SerialKlipperPrinter::get_files()
        return files_result;
    }

-    parse_file_list(doc, files, 20);
+    parse_file_list(doc, files, MAX_FILE_LIST_SIZE);
    
    files_result.available_files = (char**)malloc(sizeof(char*) * files.size());

--- a/CYD-Klipper/src/ui/ip_setup.cpp
+++ b/CYD-Klipper/src/ui/ip_setup.cpp
@@ -375,6 +375,8 @@ void show_ip_entry()
            lv_textarea_set_placeholder_text(host_entry, "Printer IP");
            lv_textarea_set_placeholder_text(port_entry, "Access code");
            lv_textarea_set_placeholder_text(auth_entry, "Printer serial number");
+            lv_obj_clear_flag(auth_entry, LV_OBJ_FLAG_USER_2);
+            lv_obj_add_flag(auth_entry, LV_OBJ_FLAG_USER_3);
            break;
        case PrinterType::PrinterTypeOctoprint:
            lv_obj_clear_flag(auth_entry, LV_OBJ_FLAG_USER_2);
--- a/CYD-Klipper/src/ui/macros.cpp
+++ b/CYD-Klipper/src/ui/macros.cpp
@@ -47,8 +47,7 @@ int macros_add_macros_to_panel(lv_obj_t * root_panel, BasePrinter* printer)

 static void power_device_toggle(lv_event_t * e)
 {
-    auto state = lv_obj_get_state(lv_event_get_target(e));
-    bool checked = (state & LV_STATE_CHECKED == LV_STATE_CHECKED);
+    bool checked = lv_obj_has_state(lv_event_get_target(e), LV_STATE_CHECKED);
    DoubleStorage* device = (DoubleStorage*)lv_event_get_user_data(e);
    LOG_F(("Power Device: %s, State: %d -> %d\n", device->power_device_name, !checked, checked))

--- a/CYD-Klipper/src/ui/panels/settings_panel.cpp
+++ b/CYD-Klipper/src/ui/panels/settings_panel.cpp
@@ -15,8 +15,7 @@
 #endif // REPO_VERSION

 static void invert_color_switch(lv_event_t * e){
-    auto state = lv_obj_get_state(lv_event_get_target(e));
-    bool checked = (state & LV_STATE_CHECKED == LV_STATE_CHECKED);
+    bool checked = lv_obj_has_state(lv_event_get_target(e), LV_STATE_CHECKED);
    global_config.printer_config[global_config.printer_index].invert_colors = checked;
    write_global_config();
    set_invert_display();
@@ -46,16 +45,14 @@ static void reset_ip_click(lv_event_t * e){
 }

 static void light_mode_switch(lv_event_t * e){
-    auto state = lv_obj_get_state(lv_event_get_target(e));
-    bool checked = (state & LV_STATE_CHECKED == LV_STATE_CHECKED);
+    bool checked = lv_obj_has_state(lv_event_get_target(e), LV_STATE_CHECKED);
    get_current_printer()->printer_config->light_mode = checked;
    write_global_config();
    set_color_scheme();
 }

 static void filament_move_mode_switch(lv_event_t * e){
-    auto state = lv_obj_get_state(lv_event_get_target(e));
-    bool checked = (state & LV_STATE_CHECKED == LV_STATE_CHECKED);
+    bool checked = lv_obj_has_state(lv_event_get_target(e), LV_STATE_CHECKED);
    get_current_printer()->printer_config->custom_filament_move_macros = checked;
    write_global_config();
 }
@@ -97,51 +94,44 @@ static void wake_timeout_dropdown(lv_event_t * e){
 }

 static void dualusb_screen_fix_switch(lv_event_t* e){
-    auto state = lv_obj_get_state(lv_event_get_target(e));
-    bool checked = (state & LV_STATE_CHECKED == LV_STATE_CHECKED);
+    bool checked = lv_obj_has_state(lv_event_get_target(e), LV_STATE_CHECKED);
    global_config.display_mode = checked;
    write_global_config();
    ESP.restart();
 }

 static void disable_m117_messaging_switch(lv_event_t* e){
-    auto state = lv_obj_get_state(lv_event_get_target(e));
-    bool checked = (state & LV_STATE_CHECKED == LV_STATE_CHECKED);
+    bool checked = lv_obj_has_state(lv_event_get_target(e), LV_STATE_CHECKED);
    global_config.disable_m117_messaging = checked;
    write_global_config();
 }

 static void sort_macros_switch(lv_event_t* e){
-    auto state = lv_obj_get_state(lv_event_get_target(e));
-    bool checked = (state & LV_STATE_CHECKED == LV_STATE_CHECKED);
+    bool checked = lv_obj_has_state(lv_event_get_target(e), LV_STATE_CHECKED);
    global_config.sort_macros = checked;
    write_global_config();
 }

 static void show_estop_switch(lv_event_t* e){
-    auto state = lv_obj_get_state(lv_event_get_target(e));
-    bool checked = (state & LV_STATE_CHECKED == LV_STATE_CHECKED);
+    bool checked = lv_obj_has_state(lv_event_get_target(e), LV_STATE_CHECKED);
    global_config.show_estop = checked;
    write_global_config();
 }

 static void full_filenames_switch(lv_event_t* e){
-    auto state = lv_obj_get_state(lv_event_get_target(e));
-    bool checked = (state & LV_STATE_CHECKED == LV_STATE_CHECKED);
+    bool checked = lv_obj_has_state(lv_event_get_target(e), LV_STATE_CHECKED);
    global_config.full_filenames = checked;
    write_global_config();
 }

 static void double_size_gcode_img_switch(lv_event_t* e){
-    auto state = lv_obj_get_state(lv_event_get_target(e));
-    bool checked = (state & LV_STATE_CHECKED == LV_STATE_CHECKED);
+    bool checked = lv_obj_has_state(lv_event_get_target(e), LV_STATE_CHECKED);
    global_config.double_size_gcode_img = checked;
    write_global_config();
 }

 static void rotate_screen_switch(lv_event_t* e){
-    auto state = lv_obj_get_state(lv_event_get_target(e));
-    bool checked = (state & LV_STATE_CHECKED == LV_STATE_CHECKED);
+    bool checked = lv_obj_has_state(lv_event_get_target(e), LV_STATE_CHECKED);
    global_config.rotate_screen = checked;
    global_config.screen_calibrated = false;
    write_global_config();
@@ -149,8 +139,7 @@ static void rotate_screen_switch(lv_event_t* e){
 }

 static void on_during_print_switch(lv_event_t* e){
-    auto state = lv_obj_get_state(lv_event_get_target(e));
-    bool checked = (state & LV_STATE_CHECKED == LV_STATE_CHECKED);
+    bool checked = lv_obj_has_state(lv_event_get_target(e), LV_STATE_CHECKED);
    global_config.on_during_print = checked;
    check_if_screen_needs_to_be_disabled();
    write_global_config();
@@ -161,15 +150,13 @@ static void btn_ota_do_update(lv_event_t * e){
 }

 static void auto_ota_update_switch(lv_event_t* e){
-    auto state = lv_obj_get_state(lv_event_get_target(e));
-    bool checked = (state & LV_STATE_CHECKED == LV_STATE_CHECKED);
+    bool checked = lv_obj_has_state(lv_event_get_target(e), LV_STATE_CHECKED);
    global_config.auto_ota_update = checked;
    write_global_config();
 }

 static void multi_printer_switch(lv_event_t* e){
-    auto state = lv_obj_get_state(lv_event_get_target(e));
-    bool checked = (state & LV_STATE_CHECKED == LV_STATE_CHECKED);
+    bool checked = lv_obj_has_state(lv_event_get_target(e), LV_STATE_CHECKED);
    global_config.multi_printer_mode = checked;
    write_global_config();
    nav_buttons_setup(PANEL_SETTINGS);
--- a/CYD-Klipper/src/ui/panels/temp_panel.cpp
+++ b/CYD-Klipper/src/ui/panels/temp_panel.cpp
@@ -161,9 +161,7 @@ static void set_temp_via_preset(lv_event_t * e){
 }

 static void btn_toggleable_edit(lv_event_t * e){
-    lv_obj_t * btn = lv_event_get_target(e);
-    auto state = lv_obj_get_state(btn);
-    temp_edit_mode = (state & LV_STATE_CHECKED == LV_STATE_CHECKED);
+    temp_edit_mode = lv_obj_has_state(lv_event_get_target(e), LV_STATE_CHECKED);
 }

 static void btn_retract(lv_event_t * e){
--- a/CYD-Klipper/src/ui/serial/serial_console.cpp
+++ b/CYD-Klipper/src/ui/serial/serial_console.cpp
@@ -5,11 +5,49 @@

 #define MAX_COMDLINE_SIZE 80
 #define MAX_WORDS 6
+#define BACKSPACE_CHAR 0x08
+#define ESCAPE_CHAR '\x1b'
+#define CSI_CHAR '['
+#define LEFT_ARROW_CHAR 'D'
+#define RIGHT_ARROW_CHAR 'C'
+#define DELETE_KEY_1_CHAR '3'
+#define DELETE_KEY_2_CHAR '~'
+#define PRINT_CHAR_START 32
+#define PRINT_CHAR_END 126

 namespace serial_console
 {
    bool global_disable_serial_console = false;

+    /**
+     * @brief Redraws the characters from the current cursor position to the end of the buffer on the serial console.
+     *
+     * This function is used to update the terminal display when characters are inserted or deleted
+     * in the middle of the input buffer. It:
+     *   - Saves the current cursor position
+     *   - Clears the line from the cursor to the end
+     *   - Prints characters from 'cur' to 'len'
+     *   - Restores the original cursor position
+     *
+     * @param cur Current cursor position within the buffer
+     * @param len Current length of the buffer (number of characters entered)
+     * @param buf Character buffer containing the input string
+     */
+    static inline void redraw(const int cur, const int len, char *buf) {
+        if (!temporary_config.remote_echo)
+            return;
+
+        Serial.print("\x1b[s");
+        Serial.print("\x1b[K");
+
+        // Reprint characters from cur to end
+        for (int i = cur; i < len; i++) {
+            Serial.print((char)buf[i]);
+        }
+
+        Serial.print(" \x1b[u");
+    }
+
    /*
     * read_string_until: Non-blocking replacement for Serial.readStringUntil()..
     * With delimeter '\n' acts as 'read line'.
@@ -20,6 +58,7 @@ namespace serial_console
    bool read_string_until(char delimiter, char *result, int max_len)
    {
        static int index = 0;
+        static int cur = 0;
        int c;         // read character, -1 if none
        int cnt = 100; // limit on amount of iterations in one go; we're supposed to be non-blocking!

@@ -28,43 +67,75 @@ namespace serial_console
            --cnt;

            // backspaceF
-            if (c == 8)
-            {
-                if (index > 0)
-                {
-                    if(temporary_config.remote_echo) Serial.print("\x08 \x08"); // overwrite last character with space and move cursor 1 back.
+            if (c == BACKSPACE_CHAR && cur > 0) {
+                    // shift characters left from cursor position
+                    memmove(&result[cur - 1], &result[cur], index - cur);
                    index--;
+                    cur--;
+                    // move cursor left on terminal and redraw updated string
+                    if(temporary_config.remote_echo) Serial.print("\x1b[D");
+                    redraw(cur, index, result);
+            // handle ANSI escape sequences (arrow keys, delete key)
+            } else if (c == ESCAPE_CHAR) {
+
+                if ((c = Serial.read()) == -1)
+                    break;
+
+                // Expect '[' character
+                if (c != CSI_CHAR)
+                    continue;
+
+                if ((c = Serial.read()) == -1)
+                    break;
+
+                // Left arrow key
+                if (c == LEFT_ARROW_CHAR && cur > 0) {
+                    // move cursor left on terminal
+                    if(temporary_config.remote_echo) Serial.print("\x1b[D");
+                    cur--;
+                // Right arrow key
+                } else if(c == RIGHT_ARROW_CHAR && cur < index) {
+                    // move cursor right on terminal
+                    if(temporary_config.remote_echo) Serial.print("\x1b[C");
+                    cur++;
+                // Delete key
+                } else if(c == DELETE_KEY_1_CHAR) {
+                    if ((c = Serial.read()) == -1)
+                        break;
+                    if (c == DELETE_KEY_2_CHAR && cur < index) {
+                        memmove(&result[cur], &result[cur + 1], index - cur - 1);
+                        index--;
+                        redraw(cur, index, result);
+                    }
                }
-                continue;
-            }

-            if(temporary_config.remote_echo) Serial.print((char)c); // echo
-
-            // Buffer overflow handling:
-            // start treating current buffer as invalid:
-            // - stop collecting more data
-            // - return false on delimeter, flushing everything collected,
-            // - restart collection from scratch after delimeter,
-            // - return control as normal.
-
-            if (index >= max_len - 1)
-            {
-                if (c == delimiter) // got delimeter: flush buffer quietly, restart collection.
-                {
+            // Handle printable characters
+            } else if (c >= PRINT_CHAR_START && c <= PRINT_CHAR_END) {
+                // Append character at the end
+                if (index < max_len - 1 && cur == index) {
+                    if(temporary_config.remote_echo) Serial.print((char)c);
+                    result[index++] = c;
+                    cur++;
+                // Insert character in the middl
+                } else if (index < max_len - 1) {
+                    memmove(&result[cur + 1], &result[cur], index - cur);
+                    result[cur] = c;
+                    index++;
+                    if(temporary_config.remote_echo) Serial.print((char)c);
+                    cur++;
+                    redraw(cur, index, result);
+                } else if (c == delimiter) { // got delimeter: flush buffer quietly, restart collection.
                    index = 0;
+                    cur = 0;
                    return false;
                }
-                else
-                    continue; // discard any data past the end of the buffer, keep reading
-            }
-
-            result[index++] = c;
-
            // delimiter was found
-            if (c == delimiter)
-            {
+            } else if (c == delimiter) {
+
+                if(temporary_config.remote_echo) Serial.println();
                result[index] = '\0'; // Null-terminate the string
                index = 0;
+                cur = 0;
                return true; // Success: Delimiter found
            }
        }
--- a/README.md
+++ b/README.md
@@ -2,9 +2,10 @@
 [![Donations](https://img.shields.io/badge/Support%20on-Ko--Fi-red)](https://ko-fi.com/suchmememanyskill)

 # CYD-Klipper
-An implementation of a wireless Klipper status display on an ESP32 + screen. Uses Moonraker to fetch data.
+An implementation of a wireless Klipper, Bambu and Octoprint status display on an ESP32 + screen. Uses Moonraker to fetch data.

 A simple and cheap solution to use a dedicated screen with Klipper, a 3d printing Firmware.
+Also now with Bambu Lab and Octoprint printers!

 ![showcase_image](readme/PXL_20231113_171629383.jpg)

@@ -24,6 +25,8 @@ A ESP32-2432S028R is required to run this project. You can find out where to buy
 - Toggle Moonraker power devices
 - OTA updates
 - Serial console over USB (115200 8n1, echo off, LF/LF)
+- Control Klipper, Octoprint and Bambu printers.
+- Wired Serial/Usb Klipper connection

 ### Install

@@ -39,6 +42,21 @@ If you found this project helpful, please consider a donation [to my Ko-Fi](http

 Thank you!

+### Where to buy hardware
+All links below are affiliate links. Please also check yourself if there is a cheaper version available than the ones below. I have only linked ones that i have personally bought.
+
+*ESP32-2432S028R (2.8" Resistive, Cheapest)*
+- [USB C + microB version](https://s.click.aliexpress.com/e/_omjsYBJ)
+- [Another USB C + microB version](https://s.click.aliexpress.com/e/_olKBkmz)
+- [microB version](https://s.click.aliexpress.com/e/_oCWhgmN)
+
+*ESP32-2432S032C (3.2" Capacitive)*
+- [Only the capacitive version is supported! USB-C](https://s.click.aliexpress.com/e/_okbSGmd)
+- [IPS version (not that great of a screen), Only the capacitive version is supported! USB-C](https://s.click.aliexpress.com/e/_oFygVwt)
+
+*ESP32-3248S035C (3.5" Capacitive)*
+- [microB version](https://s.click.aliexpress.com/e/_oCqygE9)
+
 ### Screenshots
 (Quite literally shots of the screen. I'm sorry)

--- a/ci.json
+++ b/ci.json
@@ -0,0 +1,67 @@
+{
+    "esp32-2432S024C-SD": {
+        "name": "ESP32-2432S024 (2.4\" Capacitive)",
+        "site": true,
+        "s3": false
+    },
+    "esp32-2432S028R": {
+        "name": "ESP32-2432S028 (2.8\" Resistive)",
+        "site": true,
+        "s3": false,
+        "default": true
+    },
+    "esp32-2432S032C-SD": {
+        "name": "ESP32-2432S032 (3.2\" Capacitive)",
+        "site": true,
+        "s3": false
+    },
+    "esp32-3248S035C": {
+        "name": "ESP32-3248S035 (3.5\" Capacitive)",
+        "site": true,
+        "s3": false
+    },
+    "esp32-3248S035C-V": {
+        "name": "ESP32-3248S035 (3.5\" Capacitive) Vertical Orientation",
+        "site": true,
+        "s3": false
+    },
+    "esp32-4827S043C-SD": {
+        "name": "ESP32-4827S043 (4.3\" 480x270 Capacitive)",
+        "site": true,
+        "s3": true
+    },
+    "esp32-8048S043C-SD": {
+        "name": "ESP32-8048S043 (4.3\" 800x480 Capacitive)",
+        "site": true,
+        "s3": true
+    },
+    "esp32-8048S043C-SD-alt": {
+        "name": "ESP32-8048S043 Alt (4.3\" 800x480 Capacitive)",
+        "site": true,
+        "s3": true
+    },
+    "esp32-CROWPANEL-28R": {
+        "name": "ESP32-CROWPANEL-28R (2.8\" Resistive)",
+        "site": true,
+        "s3": false,
+        "brand": "CrowPanel"
+    },
+    "esp32-CROWPANEL-35C": {
+        "name": "ESP32-CROWPANEL-35C (3.5\" Capacitive)",
+        "site": true,   
+        "s3": true,
+        "brand": "CrowPanel"
+    },
+    "esp32-JC4827W543C": {
+        "name": "ESP-JC4827W543C (4.3\" Capacitive)",
+        "site": true,
+        "s3": true,
+        "brand": "Guition"
+    },
+    "esp32-JC8048W550": {
+        "name": "Guition JC8048W550 (5\" Capacitive)",
+        "site": true,
+        "s3": true,
+        "brand": "Guition"
+    }
+}
--- a/ci.py
+++ b/ci.py
@@ -1,50 +1,31 @@
 import subprocess, os, shutil, json

-CYD_PORTS = [
-    "esp32-3248S035C", 
-    "esp32-2432S028R", 
-    "esp32-2432S032C-SD", 
-    "esp32-8048S043C-SD",
-    "esp32-8048S043C-SD-alt", 
-    "esp32-2432S024C-SD", 
-    "esp32-4827S043C-SD",
-    "esp32-3248S035C-V",
-    #"esp32-4827S043R-SD",
-    "esp32-CROWPANEL-28R",
-]
-
-ESP_S3_CHIPS = [
-    "esp32-8048S043C-SD",
-    "esp32-8048S043C-SD-alt",
-    "esp32-4827S043C-SD",
-]
-
 BASE_DIR = os.getcwd()

-def get_manifest(base_path : str, device_name : str):
+def get_manifest(base_path : str, device_name : str, is_s3 : bool):
    return {
        "name": f"to {device_name}",
        "funding_url": "https://ko-fi.com/suchmememanyskill",
        "new_install_prompt_erase": True,
        "builds": [
            {
-                "chipFamily": "ESP32-S3" if device_name in ESP_S3_CHIPS else "ESP32",
+                "chipFamily": "ESP32-S3" if is_s3 else "ESP32",
                "parts": [
                    {
                        "path": f"{base_path}/bootloader.bin",
-                        "offset": 4096
+                        "offset": 0 if is_s3 else 0x1000 
                    },
                    {
                        "path": f"{base_path}/partitions.bin",
-                        "offset": 32768
+                        "offset": 0x8000
                    },
                    {
                        "path": f"{base_path}/boot_app0.bin",
-                        "offset": 57344
+                        "offset": 0xe000
                    },
                    {
                        "path": f"{base_path}/firmware.bin",
-                        "offset": 65536
+                        "offset": 0x10000
                    }
                ]
            }
@@ -57,6 +38,7 @@ def extract_commit() -> str:

 repo_version = extract_commit()
 configurations = []
+site_sections : dict[str, dict] = {"CYD": []}

 def add_configuration(board : str):
    configurations.append({
@@ -65,10 +47,32 @@ def add_configuration(board : str):
        "URL": f"https://suchmememanyskill.github.io/CYD-Klipper/out/{board}/firmware.bin"
    })

+def add_site_section(port : str, data : dict[str, bool|str]):
+    brand = data["brand"] if "brand" in data else "CYD"
+    
+    if brand not in site_sections:
+        site_sections[brand] = []
+
+    site_sections[brand].append({
+        "name": data["name"],
+        "port": port,
+        "default": "default" in data and data["default"],
+    })
+
 if os.path.exists("out"):
    shutil.rmtree("out")

-for port in CYD_PORTS:
+if not os.path.exists("_site"):
+    os.makedirs("_site")
+
+with open("./ci.json", "r") as fp:
+    ci_data : dict[str, dict[str, bool|str]] = json.load(fp)
+
+for port, data in ci_data.items():
+    if "skip" in data and data["skip"]:
+        print(f"Skipping {port}...")
+        continue
+
    port_path = f"out/{port}"
    os.chdir(BASE_DIR)
    os.makedirs(port_path, exist_ok=True)
@@ -80,15 +84,21 @@ for port in CYD_PORTS:

    shutil.copy(os.path.join(os.path.expanduser("~"), ".platformio/packages/framework-arduinoespressif32/tools/partitions/boot_app0.bin"), f"{port_path}/boot_app0.bin")
    os.chdir(port_path)
-    subprocess.run(["python3", "-m", "esptool", "--chip", "esp32", "merge_bin", "-o", "merged_firmware.bin", "--flash_mode", "dio", "--flash_freq", "40m", "--flash_size", "4MB", "0x1000", "bootloader.bin", "0x8000", "partitions.bin", "0xe000", "boot_app0.bin", "0x10000", "firmware.bin"], check=True)
+    if (bool(data["s3"])):
+        subprocess.run(["esptool", "--chip", "esp32s3", "merge_bin", "-o", "merged_firmware.bin", "--flash_mode", "dio", "--flash_freq", "80m", "--flash_size", "16MB", "0x0000", "bootloader.bin", "0x8000", "partitions.bin", "0xe000", "boot_app0.bin", "0x10000", "firmware.bin"], check=True)
+    else:    
+        subprocess.run(["esptool", "--chip", "esp32", "merge_bin", "-o", "merged_firmware.bin", "--flash_mode", "dio", "--flash_freq", "40m", "--flash_size", "4MB", "0x1000", "bootloader.bin", "0x8000", "partitions.bin", "0xe000", "boot_app0.bin", "0x10000", "firmware.bin"], check=True)

    os.chdir(BASE_DIR)

    with open(f"./_site/{port}.json", "w") as f:
-        json.dump(get_manifest(port_path, port), f)
+        json.dump(get_manifest(port_path, port, bool(data["s3"])), f)

    add_configuration(port)

+    if "site" in data and data["site"]:
+        add_site_section(port, data)
+
 os.chdir(BASE_DIR)
 out_dir = "./_site/out"
 if os.path.exists(out_dir):
@@ -97,3 +107,16 @@ shutil.copytree("./out", out_dir)

 with open("./_site/OTA.json", "w") as f:
    json.dump({"Configurations": configurations}, f)
+
+with open("./_site/index.html", "w") as fp:
+    with open("./template.html", "r") as template_fp:
+        template = template_fp.read()
+
+    insert_html = ""
+    
+    for brand, sections in site_sections.items():
+        option_htmls = [f"<option {'selected' if x['default'] else ''} value=\"{x['port']}\">{x['name']}</option>" for x in sections]
+        section_html = f"<optgroup label=\"{brand}\">{''.join(option_htmls)}</optgroup>"
+        insert_html += section_html
+
+    fp.write(template.replace("{{%PORTS%}}", insert_html))
--- a/serial/install.sh
+++ b/serial/install.sh
@@ -1,8 +1,21 @@
 #!/bin/bash

 if [ "$EUID" -eq 0 ]; then
-    echo "Please do not run as root"
-    exit
+    read -r -p "Are you sure you want to run this service as root? [y/N] " response
+    response=${response,,}    # tolower
+    if ! [[ "$response" =~ ^(yes|y)$ ]]; then
+        exit
+    fi
+    SERVICE_PATH="/etc/systemd/system/cyd-klipper-serial.service"
+else
+    echo "Are you sure you want to run this service as the current user?"
+    read -r -p "Make sure this user is logged in at boot! [y/N] " response
+    response=${response,,}    # tolower
+    if ! [[ "$response" =~ ^(yes|y)$ ]]; then
+        exit
+    fi
+    mkdir -p ~/.config/systemd/user
+    SERVICE_PATH="$HOME/.config/systemd/user/cyd-klipper-serial.service"
 fi

 set -e
@@ -15,20 +28,26 @@ source ./env/bin/activate
 pip3 install -r requirements.txt

 # Create systemd unit file
-mkdir -p ~/.config/systemd/user
-echo "[Unit]" > ~/.config/systemd/user/cyd-klipper-serial.service
-echo "Description=CYD Klipper serial server" >> ~/.config/systemd/user/cyd-klipper-serial.service
-echo "After=network.target" >> ~/.config/systemd/user/cyd-klipper-serial.service
-echo "" >> ~/.config/systemd/user/cyd-klipper-serial.service
-echo "[Service]" >> ~/.config/systemd/user/cyd-klipper-serial.service
-echo "ExecStart=$(pwd)/run.sh" >> ~/.config/systemd/user/cyd-klipper-serial.service
-echo "WorkingDirectory=$(pwd)" >> ~/.config/systemd/user/cyd-klipper-serial.service
-echo "Restart=always" >> ~/.config/systemd/user/cyd-klipper-serial.service
-echo "" >> ~/.config/systemd/user/cyd-klipper-serial.service
-echo "[Install]" >> ~/.config/systemd/user/cyd-klipper-serial.service
-echo "WantedBy=multi-user.target" >> ~/.config/systemd/user/cyd-klipper-serial.service
+
+echo "[Unit]" > $SERVICE_PATH
+echo "Description=CYD Klipper serial server" >> $SERVICE_PATH
+echo "After=network.target" >> $SERVICE_PATH
+echo "" >> $SERVICE_PATH
+echo "[Service]" >> $SERVICE_PATH
+echo "ExecStart=$(pwd)/run.sh" >> $SERVICE_PATH
+echo "WorkingDirectory=$(pwd)" >> $SERVICE_PATH
+echo "Restart=always" >> $SERVICE_PATH
+echo "" >> $SERVICE_PATH
+echo "[Install]" >> $SERVICE_PATH
+echo "WantedBy=multi-user.target" >> $SERVICE_PATH

 # Start the service
-systemctl --user daemon-reload
-systemctl --user enable cyd-klipper-serial
-systemctl --user start cyd-klipper-serial
+if [ "$EUID" -eq 0 ]; then
+    systemctl daemon-reload
+    systemctl enable cyd-klipper-serial
+    systemctl start cyd-klipper-serial
+else
+    systemctl --user daemon-reload
+    systemctl --user enable cyd-klipper-serial
+    systemctl --user start cyd-klipper-serial
+fi
--- a/serial/uninstall.sh
+++ b/serial/uninstall.sh
@@ -1,13 +1,21 @@
 #!/bin/bash

+set -e
+
 if [ "$EUID" -eq 0 ]; then
-    echo "Please do not run as root"
-    exit
+    systemctl stop cyd-klipper-serial
+    systemctl disable cyd-klipper-serial
+
+    rm /etc/systemd/system/cyd-klipper-serial.service
+
+    systemctl daemon-reload
+else
+    systemctl --user stop cyd-klipper-serial
+    systemctl --user disable cyd-klipper-serial
+
+    rm ~/.config/systemd/user/cyd-klipper-serial.service
+
+    systemctl --user daemon-reload
 fi

-systemctl --user stop cyd-klipper-serial
-systemctl --user disable cyd-klipper-serial
-
-rm ~/.config/systemd/user/cyd-klipper-serial.service
-
-systemctl --user daemon-reload
+rm -rf ./env
--- a/_site/index.html
+++ b/_site/index.html
@@ -8,7 +8,7 @@
      font-family: 'Roboto', sans-serif;
    }

-        TT {
+    TT {
      font-family: 'Terminal', monospace;
          background-color: #080a0b;
    }
@@ -24,7 +24,8 @@
      max-width: 750px;
    }

-    .main > section > :not(:first-child) {
+    .main > section > :not(:first-child),
+    .indent {
      margin-left: 20px;
    }

@@ -44,6 +45,17 @@
    #changelog-body {
      white-space: break-spaces;
    }
+
+    .where-to-get details summary::marker
+    {
+      content: '';
+    }
+
+    .where-to-get details[open] summary p 
+    {
+      display: none;
+    }
+
  </style>
  <script type="module" src="https://unpkg.com/esp-web-tools@9/dist/web/install-button.js?module"></script>
  <script src="//code.iconify.design/1/1.0.6/iconify.min.js"></script>
@@ -71,7 +83,7 @@
 <body>
  <section class="main">
    <h2>CYD-Klipper <span class="iconify" data-icon="mdi-printer-3d" style="color: #F44;"></span></h2>
-    <p>An implementation of a Klipper status display on an ESP32 + screen.<br>Uses Moonraker to fetch data.<br><a href="https://github.com/suchmememanyskill/CYD-Klipper">Source code is available on GitHub</a>.</p>
+    <p>An implementation of a wireless Klipper, Bambu and Octoprint status display on an ESP32 + screen.<br>Uses Moonraker to fetch data.<br><a href="https://github.com/suchmememanyskill/CYD-Klipper">Source code is available on GitHub</a>.</p>

    <section class="changelog">
      <h3 id="changelog-header"><span class="iconify" data-icon="mdi-hammer-wrench" style="color: lightgray;"></span> Changelog <span id="changelog-header-version"></span></h3>
@@ -83,6 +95,34 @@
      <p>If you found this project helpful, please consider a donation to <a href="https://ko-fi.com/suchmememanyskill">my Ko-Fi</a>.<br>It would help out a lot in the development of this project, due to the need to buy the screens.<br>Thank you!</p>
    </section>

+    <section class="where-to-get">
+      <details>
+        <summary>
+          <h3><span class="iconify" data-icon="mdi-shopping" style="color:orange; filter: drop-shadow(0 0 0.75rem orange);"></span> Where to buy hardware</h3>
+          <p class="indent">(Click to expand)</p>
+        </summary>
+        <section class="indent">
+          <p>All links below are affiliate links. Please also check yourself if there is a cheaper version available than the ones below. I have only linked ones that i have personally bought.</p>
+          <i>ESP32-2432S028R (2.8" Resistive, Cheapest)</i>
+          <ul>
+            <li><a href="https://s.click.aliexpress.com/e/_omjsYBJ">USB C + microB version</a></li>
+            <li><a href="https://s.click.aliexpress.com/e/_olKBkmz">Another USB C + microB version</a></li>
+            <li><a href="https://s.click.aliexpress.com/e/_oCWhgmN">microB version</a></li>
+          </ul>
+          <i>ESP32-2432S032C (3.2" Capacitive)</i>
+          <ul>
+            <li><a href="https://s.click.aliexpress.com/e/_okbSGmd">Only the capacitive version is supported! USB-C</a></li>
+            <li><a href="https://s.click.aliexpress.com/e/_oFygVwt">IPS version (not that great of a screen), Only the capacitive version is supported! USB-C</a></li>
+          </ul>
+          <i>ESP32-3248S035C (3.5" Capacitive)</i>
+          <ul>
+            <li><a href="https://s.click.aliexpress.com/e/_oCqygE9">microB version</a></li>
+          </ul>
+        </section>
+      </details>
+
+    </section>
+
    <section class="issues">
      <h3><span class="iconify" data-icon="mdi-github" style="color: white; filter: drop-shadow(0 0 0.75rem gray);"></span> Report Issues</h3>
      <p>If you experience any issues with this project, or have any feature requests for the project, please report them on the <a href="https://github.com/suchmememanyskill/CYD-Klipper/issues">issues tab on Github</a>.</p>
@@ -92,15 +132,7 @@
      <h3><span class="iconify" data-icon="mdi-download"></span> Install</h3>
      <p>Select your device from the list below and click 'Connect'.<br>Note: You may need to hold the 'BOOT' button on the device while pressing install.<br><br>The 2.8" Resistive and 3.5" Capacitive models are best suited (in my opinion) for CYD-Klipper.<br><br>Note for any resistive models: You can clear touch calibration by holding the BOOT button for 8 seconds while the screen is on.</p>
      <select id="select-install-btn" onchange="setInstallButton(getElementById('select-install-btn').value)">
-        <option value="esp32-2432S024C-SD">ESP32-2432S024 (2.4" Capacitive)</option>
-        <option selected value="esp32-2432S028R">ESP32-2432S028 (2.8" Resistive)</option>
-        <option value="esp32-2432S032C-SD">ESP32-2432S032 (3.2" Capacitive)</option>
-        <option value="esp32-3248S035C">ESP32-3248S035 (3.5" Capacitive)</option>
-        <option value="esp32-3248S035C-V">ESP32-3248S035 (3.5" Capacitive) Vertical Orientation</option>
-        <option value="esp32-4827S043C-SD">ESP32-4827S043 (4.3" 480x270 Capacitive)</option>
-        <option value="esp32-8048S043C-SD">ESP32-8048S043 (4.3" 800x480 Capacitive)</option>
-        <option value="esp32-8048S043C-SD-alt">ESP32-8048S043 Alt (4.3" 800x480 Capacitive)</option>
-        <option value="esp32-CROWPANEL-28R">ESP32-CROWPANEL-28R (2.8" Resistive)</option>
+            {{%PORTS%}}
      </select>
      <span id="install-btn"></span>
    </section>
--- a/test_printer/docker-compose.yml
+++ b/test_printer/docker-compose.yml
@@ -4,11 +4,11 @@ services:
    ports:
      - "7125:7125"
      - "8110:8110"
-    image: ghcr.io/mainsail-crew/virtual-klipper-printer:master
+    image: ghcr.io/mainsail-crew/virtual-klipper-printer:latest
  webui:
    container_name: mainsail
    volumes:
      - ./config.json:/usr/share/nginx/html/config.json:ro
    ports:
      - 6969:80
-    image: ghcr.io/mainsail-crew/mainsail
+    image: ghcr.io/mainsail-crew/mainsail
Author	SHA1	Message	Date
suchmememanyskill	c8e34598ca	Merge branch 'master' of https://github.com/suchmememanyskill/CYD-Klipper-Display	2025-09-30 00:19:48 +02:00
suchmememanyskill	77086b8ecf	update virtual printer	2025-09-30 00:19:41 +02:00
Sims	93f3935480	Fix #178	2025-08-19 00:51:29 +02:00
suchmememanyskill	3e23ba935d	Merge branch 'dev'	2025-08-18 23:29:01 +02:00
Stefan Naewe	07d5f95b00	use correct spelling for WiFiClientSecure.h (#202 ) It's "WiFiClient..." and not "WifiClient..." Signed-off-by: Stefan Naewe <stefan.naewe@gmail.com>	2025-08-10 14:14:53 +02:00
suchmememanyskill	19fb87d0bb	Add support for esp32-JC3248W535C	2025-07-10 14:55:16 +02:00
suchmememanyskill	d126697cb0	Better CI pipeline	2025-07-10 00:45:25 +02:00
suchmememanyskill	63a0ca5233	Fix bad code	2025-07-09 23:55:50 +02:00
suchmememanyskill	c929b5e270	Merge main	2025-07-09 23:49:04 +02:00
Dylan Pryke-Watanabe	b6c2b505e0	Add support for JC3248W535C (Guition 3.5" ESP32-S3 Display) (#189 ) * Guition Display outputs to screen * Fix Display Flushing and Touch Screen works now! * fix UI rotations * set default orientation to 2 * Start trying to implement horizontal software rotation * remove -w flag * cleanup * Rename to JC3248W535C * Update lv_conf.h * replace URL	2025-07-09 23:44:27 +02:00
Madrajib Lab	40932518ae	serial_console: Add support to handle delete/arrow keys (#195 ) This change adds support to serial console to handle delete left & right arrow and backspace key by changing result buffer based on the keypress and emulating the movement with espace characters in the terminal. This patch also takes care of buffer flow handling by checking the cur and index with the max available length for each operations.	2025-07-09 23:42:57 +02:00
Madrajib Lab	266b5d76b1	lvgl API: use lv_obj_has_state to check state value (#198 )	2025-07-09 23:42:29 +02:00
Madrajib Lab	4067f94407	platfromio: Update LovyanGFX from 1.2.0 to 1.2.7 (#196 )	2025-07-09 23:41:46 +02:00
Evgeny Kapusta	5b7770246e	feat: add Guition JC8048W550 display support (#185 ) * Update readme * Update README.md * Add aliexpress links * feat: add Guition JC8048W550 display support * feat: adjust configuration for board * feat: add option for jc8048w550 on page and in ci script * fix: missing CYD_PORTS entry --------- Co-authored-by: Sims <38142618+suchmememanyskill@users.noreply.github.com>	2025-05-02 23:42:06 +02:00
suchmememanyskill	04a3b78b21	Add crowpanel 3.5 inch to html	2025-02-09 02:37:37 +01:00
Sims	7c564e8ab8	Merge pull request #166 from suchmememanyskill/dev Hopefully fix webflash for s3	2025-02-09 01:57:02 +01:00
suchmememanyskill	5c0ee08135	Hopefully fix webflash for s3	2025-02-09 01:14:07 +01:00
Sims	e6b5d17f6a	Merge pull request #164 from suchmememanyskill/dev v2.1.0	2025-02-01 19:39:18 +01:00
suchmememanyskill	d8a9b13fe1	Fix compile	2025-02-01 17:37:06 +01:00
suchmememanyskill	fbc2964ad8	Make serial script work with both sudo and not sudo	2025-02-01 17:20:06 +01:00
suchmememanyskill	d616ef5a6d	Allow running service under root	2025-01-28 21:50:21 +01:00
suchmememanyskill	9bfbb1cb0e	Change keyboard for bambu setup (#161 )	2025-01-28 21:23:02 +01:00
suchmememanyskill	8d8e36fde9	Merge #152	2025-01-28 21:20:22 +01:00
Kire Dyfvelsten	4e3cd69b63	Sunton esp32 2.2" c (#151 ) * Update readme * Update README.md * driver definition? for a vertical 2.2" with touch * Update platformio.ini * Update esp32-2432S022C-vertical.json * Update esp32-2432S022C-vertical.json --------- Co-authored-by: Sims <38142618+suchmememanyskill@users.noreply.github.com>	2025-01-28 21:19:36 +01:00
Sims	3aeb67cfdd	esp32-CROWPANEL-35C (#159 ) * :) * Correct screen rotation * Remove brightness adjustment * Silence buzzer * Fixes from atomique	2025-01-28 21:16:46 +01:00
suchmememanyskill	8f46b9972d	Add aliexpress links	2025-01-15 22:18:36 +01:00
Sims	5756b31744	Update README.md	2025-01-10 18:15:56 +01:00
suchmememanyskill	99b70622fe	Update readme	2025-01-09 23:14:15 +01:00
Sims	b3d405b355	Merge pull request #139 from suchmememanyskill/dev v2.0.0 - Happy new year!	2025-01-09 23:05:35 +01:00
Sims	9a96f9336f	Merge pull request #125 from suchmememanyskill/dev v1.8.0	2024-08-31 11:49:48 +02:00
Sims	5c46764c7c	Merge pull request #122 from suchmememanyskill/dev v1.7.0	2024-08-02 21:39:42 +02:00